Vitek VT-1511: CLEANING Problems, their causes and solutions Problem Cause Solution
CLEANING Problems, their causes and solutions Problem Cause Solution: Vitek VT-1511
Table of contents
- DESCRIPTION IMPORTANT SAFEGUARDS
- PREPARATIONS BEFORE OPERATION MAKING ESPRESSO
- MAKING CAPPUCCINO
- WARMING UP BEVERAGES HOW TO GET GOOD ESPRESSO REMOVING THE SCALE
- CLEANING Problems, their causes and solutions Problem Cause Solution
- FOR DOMESTIC USE ONLY Specifications

ENGLISH
14. Make procedures in paragraphs 10 and
CLEANING
11at least 3 times.
- Filter cleaning (6): you can wash filter
15. Repeat cleaning of steam output chan-
in a dishwashing machine. If the open-
nels, described in paragraph 12.
ings are blocked with the rest of ground
16. With small intervals, repeat the boiler
coffee, you can clean them with a small
cleaning procedure (paragraph 10) till
brush.
citric acid solution completely resolves
- Wipe the housing of the coffee maker
in the tank.
with a damp soft cloth. Do not use metal
17. Switch on the coffee maker, by press-
brushes and abrasives.
ing the (17) ON/OFF button.
- Do not immerse the unit into water or
18. Fill the tank (3) with clear water till the
other liquids.
maximal level and repeat paragraphs
- Wash removable parts with warm water
10, 12 at least 3 times, without 10-15-
and wipe them with a dry cloth.
minute interval.
19. Switch off the coffee maker, by press-
Drops tray (9)
ing the (17) ON/OFF button.
- Remove the grid (10) from the tray (9),
remove the tray (9) and pour out water,
Note:
put the tray on its place, put the grid on
- To remove scale you can use special
the tray. If necessary wash the tray (9)
substances for scale removal, strictly fol-
and the grid (10) in water with soft deter-
lowing the instructions on their usage.
gent, rinse and dry.
Problems, their causes and solutions
Problem Cause Solution
Make sure that the socket is in op-
No voltage in the socket.
The coffee maker does
erating position.
Power plug is not completely in-
not switch on
Check whether the plug is com-
serted into the socket.
pletely inserted into the socket.
Water leaks away from
The tray is full. Pour out water from the tray
the lower part of the unit
Filter does not join firmly the densi-
Coffee leakage from the
fier in the boiler, ground coffee got
Clean the edges of the filter.
filter holder
on the edges of the filter.
Refer to “Preparation to operation”,
Wrong process of scale removal in
“Scale removal” paragraph and
Coffee made has a
the boiler
repeat them several times.
strange odor
Improper storage of coffee
Use fresh ground coffee.
Keep coffee in a dry cool place
Whisk milk only after the indicator
Low temperature of the outgoing
(15) lights up.
steam
Use narrow high container to whisk
Steam does not whisk
The tank is too large or its size is
milk
milk
improper
You have used skimmed milk
Use whole milk only, with fat status
4-6%.
7
1511.indd 71511.indd 7 03.02.2010 15:36:1603.02.2010 15:36:16






