Milwaukee MS 304 DB: Deutsch English English

Do not clamp the protective swing guard.

MAINS CONNECTION

Refrain from removing any cut-os or other parts of the workpiece

Connect only to single-phase AC current and only to the system

from the cutting area whilst the machine is running and the saw

voltage indicated on the rating plate. It is also possible to connect

head is not in the rest position.

to sockets without an earthing contact as the design conforms to

Never reach into the danger area of the plane when it is running.

safety class II.

Any faults with the machine, including any related to the safeguard

or the saw blades, must be reported to the persons in charge of safety

MAINTENANCE

as soon as the faults are discovered.

The ventilation slots of the machine must be kept clear at all times.

Do not use any anges other than those supplied or indicated in the

Use only Milwaukee accessories and Milwaukee spare parts. Should

instruction manual to secure the saw blade.

components need to be replaced which have not been described,

Replace the table insert when worn

please contact one of our Milwaukee service agents (see our list of

Do not use saw blades which are damaged or deformed

guarantee/service addresses).

Do not use saw blades not corresponding to the key data given in

If needed, an exploded view of the tool can be ordered. Please state

these instructions for use.

the Article No. as well as the machine type printed on the label and

Do not use saw blades made of high-speed steel.

order the drawing at your local service agents or directly at: Milwau-

kee Electric Tool, Max-Eyth-Straße10, D-71364Winnenden, Germany.

Only use saw blades which have been properly sharpened. It is essen-

tial to adhere to the maximum speed specied on the saw blade.

SYMBOLS

Transport and store the tools in a suitable receptacle.

It is necessary to select a saw blade which is suitable for the material

Please read the instructions carefully before starting

being cut.

the machine.

GB

GB

Never use the mitre saw to cut materials other than those specied in

the instruction manual.

Always disconnect the plug from the socket before

Long workpieces must be adequately supported.

carrying out any work on the machine.

Stock having a round or irregular cross section (such as rewood)

must not be cut, as it can not be securely held during cutting. When

sawing thin stock layed on edge, a suitable auxilary fence must be

Wear ear protectors!

used for rm support.

SPECIFIED CONDITIONS OF USE

Always wear goggles when using the machine.

The mitre saw can be used for sawing solid wood, bonded wood,

glued veneer, materials similar to wood, aluminium proles, Non-

Always keep hands away from the path of the saw

ferrous metals and plastics.

blade.

Do not use this product in any other way as stated for normal use.

ECDECLARATION OF CONFORMITY

Never expose tool to rain.

We declare under our sole responsibility that this product is in confor-

mity with the following standards or standardized documents.

EN 61029-1:2009 + A11:2010

CAUTION! WARNING! DANGER!

EN 61029-2-9:2009

EN 55014-1:2006 + A1:2009 + A2:2011

EN 55014-2:1997 + A1:2001 + A2:2008

Do not dispose of electric tools together with

EN 61000-3-2:2006 + A1:2009 + A2:2009

household waste material! In observance of European

EN 61000-3-3:2008

Directive 2002/96/EC on waste electrical and electronic

in accordance with the regulations

equipment and its implementation in accordance with

2011/65/EU (RoHs), 2006/42/EC, 2004/108/EC

national law, electric tools that have reached the end of

their life must be collected separately and returned to

an environmentally compatible recycling facility.

Rainer Kumpf

Class II construction, tool in which protection against

Winnenden, 2013-01-10

Director Product Development

electric shock does not rely on basic insulation only, but

Authorized to compile the technical le

in which additional safety precautions, such as double

insulation or reinforced insulation, are provided.

Deutsch

English

English

23