Vitek VT-3625: RESET button CHARACTERISTICS GENERAL

ENGLISH

 Press SEL again to set the directory; the first

Speaker impedance

file name in the chosen directory will be dis-

4 or 8 Ohms

played.

Maximum output power

 Use the VOL / VOL knob to choose

40 Wt x 4 channels

the desired file.

 Press SEL to begin playback of the chosen

Due to constant upgrading, the characteristics

song.

and design of this product may be changed

without prior notification.

3. Symbol search:

 Press the A/PS button 3 times; the symbol

SERVICE LIFE OF THE UNIT NOT LESS 5 YEARS

search mode will be activated.

 Press the SEL button; the symbol A will be dis-

GUARANTEE

played.

Details regarding guarantee conditions can be

 Use the VOL / VOL knob to choose the

obtained from the dealer from whom the appliance

desired letter.

was purchased. The bill of sale or receipt must be

 Press the SEL button for more than 2 seconds.

produced when making any claim under the terms of

 All songs whose name contains that symbol will

be displayed.

this guarantee.

 Use the VOL / VOL knob to choose the

This product conforms to the EMC-

desired song.

Requirements as laid down by the

 Press the SEL button to begin playback of the

Council Directive 89/336/EEC and to the

chosen song.

Low Voltage Regulation (23/73 EEC)

RESET button

The Reset (26) button is located on the front

panel.

Use the Reset button under the following cir-

cumstances:

 Upon installation after all the wires have been

connected.

 If some or all of the function buttons are not

operating.

 If the error symbol appears on the display.

CHARACTERISTICS

CD/MP3 player

Signal/noise relationship > 60 dB

Channel separation > 50 dB (1kHz)

Frequency characteristic 20Hz- 20 kHz

Tuner (FM)

Frequency band 65 - 74 MHz, 87.5 -

108 MHz

Intermediate frequency 10.7 MHz

Sensitivity 3 mkV

Stereo decommutation 35 dB

Signal/noise relationship 55 dB

Channel step 50 kHz

Tuner (MW)

Frequency band 522-1620 kHz

Intermediate frequency 10.71 MHz

Operating sensitivity 32 dB

Line out

Out 350 mV maximum

Impedance 10 kOhms

GENERAL

Power requirements

13.8 V Direct Current (10.8-15.6 V allowable)

9