Vitek VT-3625: PARTS DESCRIPTION AND OPERATING FEA- TURES INSTALLATION

ENGLISH

VT-3625

Setting the installation angle

The allowable degree of slant from the horizon-

Car Audio CD/MP3 player, MW/FM stereo

tal position is no more than 20°.

receiver with auto-tune system, RDS radio

information system with swinging removable

Installation Example

front panel.

Installing in a dashboard (PIC. 1-4)

Note: Store the key in a reliable place as you

PARTS DESCRIPTION AND OPERATING FEA-

may need to remove the device from the car in

TURES

the future.

1. Power on/off ( )

2. Function selector button (SEL): bass/treble/bal-

Removal and installation of the front panel

ance/ Fader/ TA search / DPI mask /enter/vol-

The front panel of this device can be removed in

ume/antishock system/ beep/scan/Radio oper-

order to avoid theft.

ating mode/radio settings/backlight/ volume

level setup

Removing the front panel

3. Volume up/down, level setting for

Press the ( ) button (17) in order to make it

bass/treble/balance/fader

possible for the front panel to move into the hor-

4. Stations preset (1,2,3,4,5,6)

izontal position (PIC. 5).

5. AF Function (alternate frequencies)

Press the button on the back side of the panel

6. TA Function (traffic information)

and pull forward in order to disconnect the panel

7. PTY Function (Program type)

and carefully remove the panel from its holding

8. Display button (DISP)

bracket (PIC. 6).

9 Mode button (MODE)

Place the front panel into the protective case

10.Band button (BAND)

supplied with the radio for safekeeping (PIC. 7).

11.Automatic or manual setting (frequency up or

frequency down / CD track selection /search

Be careful when handling the front panel!

button

1. Do not drop the front panel

12.Automatic Program Search Function (A/PS)

2. Do not press on the screen during installation

13.Audio equalizer settings (EQ)

and removal.

14.Auto-tuning SCAN feature (SCAN)

3. Do not touch the contacts on the panel or the

15.Sound mute button (MUTE)

main device  that can lead to poor electrical

16.LCD Display

contact.

17.Open button ( )

4. Dirt or foreign matter should be removed with a

18.CD opening

clean, dry cloth.

19.CD Eject ( )

5. Do not subject the panel to heat or direct sun-

20.Pause button (PAUSE)

light.

21.Intro mode playback (INT) (For previewing

6. Do not allow the panel to come into contact with

tracks)

flammable substances or solvents.

22.Track repeat button (RPT)

7. Do not attempt to take the front panel apart.

23.Random track selection (RDM)

24.25.+ 10 track search up/down

Installing the front panel back into place

26.Cancel and reset button (RESET)

(PIC. 8)

After the holding bracket returns to its initial

INSTALLATION

(vertical) position, place the front panel into the

bracket. Place one side of the front panel into

Preliminary Notes

the proper position and then press the other

 Carefully choose the installation location so that

side of the panel into position until you hear it

the device will not impede the normal operation

click.

of the automobile.

Note: If the panel is installed in the wrong posi-

 Avoid installing the device in places where it may

tion, several regulators may not work and parts

be subjected to sources of high temperatures,

of the display will not light. If this happens press

such as direct sunlight, hot air from the heater,

the ( ) button and reinstall the front panel.

or where it can me damaged by dust, dirt or

excessive shock.

 For safe and reliable installation, use only the

parts provided.

 Remove the front panel before installing the

device.

4