Vitek VT-3479 BK: TROUBLESHOOTING Guarantee

ENGLISH

TROUBLESHOOTING

- Laser lens steamed up

If a fault occurs, first check the points listed be-

• Wait until lens has adjusted to room

low before taking the set for repair.

temperature

Do not open the set as there is a risk of electric

shock.

The CD/MP3 skips tracks

If you are unable to remedy a problem by follow-

- CD/MP3 damaged or dirty

ing these hints, consult your dealer or service

• Replace or clean CD/MP3

center.

- Program is active

WARNING: Under no circumstances should you

• Quit Program mode(s)

try to repair the set yourself, as this will in-

validate the warranty.

Environmental information

We have done our best to reduce the packaging

-No sound /power

and make it easy to separate into 3 materials:

- Volume not adjusted

cardboard, paper pulp and expandable polyeth-

• Adjust the VOLUME

ylene.

Your set consists of materials which can be

- power cord not securely connected

recycled if disassembled by a specialized

• Connect the AC power cord properly

company. Please observe the local regulations

regarding the disposal of packaging, dead bat-

- Batteries dead/ incorrectly inserted

teries and old equipment..

• Insert (fresh) batteries correctly

The manufacturer reserves the right to make

Display does not function properly / No re-

changes to the characteristics of the device

action to operation of any of the controls

without prior notice.

- Electrostatic discharge

• Switch off and unplug the set. Reconnect

The service life of the device is no less

after a few seconds

than five years.

Poor cassette sound quality

Guarantee

- Dust and dirt on the heads, etc.

Details regarding guarantee conditions can

• Clean deck parts etc., see Maintenance

be obtained from the dealer from whom the

- Use of incompatible cassette types (METAL

appliance was purchased. The bill of sale or

or CHROME)

receipt must be produced when making any

• Only use NORMAL (IEC I) for recording

claim under the terms of this guarantee.

Recording does not work

This product conforms to the EMC-

- Cassette tab(s) may be broken

Requirements as laid down by the

• Apply a piece of adhesive tape over the

Council Directive 89/336/EEC and

missing tab space

to the Low Voltage Regulation

(23/73 EEC)

no disc indication

- No CD/MP3 inserted

• Insert a CD,MP3, CD-R.

- CD badly scratched or dirty

• Replace/ clean CD, see Maintenance

- Laser lens steamed up

• Wait until lens has cleared

- CD-R is blank or the disc is not finalized

• Use a finalized CD-R

CD/MP3 playback does not work

CD/MP3 badly scratched/dirty

• Replace/clean CD/MP3 (see maintenance)

9

3479.indd 93479.indd 9 11.04.2006 16:36:1411.04.2006 16:36:14