Vitek VT-3479 BK: General operation RADIO PLAYING A CASSETTE MAINTENANCE GENERAL INFORMATION ON RECORDING

ENGLISH

General operation

seconds, when the leader tape passes the

1. To select your sound source adjust the

recorder heads.

source to MP3/CD/TAPE/RADIO.

• To protect a tape from accidental erasure,

2. Adjust the sound with the VOLUME.

have the tape in front of you and break out

3. To switch off the set, adjust the source

the left tab.

selector to TAPE/off position.

Recording on this side is no longer possible.

To record over this side again, cover the

RADIO

tabs with a piece of adhesive tape.

Radio reception

1. Slide the FUNCTION selector to RADIO.

2. Slide the BAND selector to a desired

setting - FM STEREO, FM, AM.

3. Rotate the TUNING control to find the

desired stations.

NOTE: If the BAND selector is set to the FM

stereo position and you have tuned to an FM

stereo station, the FM stereo LED indicator

Recording from the radio

will light.

I. Tune to the desired radio station (See

4. When you have finished listening, slide the

TUNING TO RADIOSTATIONS).

FUNCTION selector to the OFF position to

2. Press STOP/EJECT to open the cassette

shut the power off.

door.

3. Insert a suitable cassette into the cassette

PLAYING A CASSETTE

deck and close the cassette door.

1. Select TAPE source.

4. Press RECORD to start recording.

2. Press STOP/EJECT to open the cassette

5. For brief interruptions, press PAUSE. To

door.

resume recording, press PAUSE again.

3 Insert a recorded cassette and close the

6. To stop recording, press STOP/EJECT.

cassette door.

4 Press PLAY to start playback.

MAINTENANCE

5 To interrupt playback, press PAUSE. To

Tape deck maintenance

resume, press the key again.

5. By pressing m or  on the set, fast

winding of the tape is possible in both

directions.

7. To stop the tape, press STOP/EJECT.

- The keys are automatically released at the

end of the tape, except if PAUSE has been

activated.

To ensure quality recording and playback of

the tape deck, clean parts A ,B andC shown in

GENERAL INFORMATION ON RECORDING

the diagram below, after approx. 50 hours of

• Recording is permissible in so far as

operation, or on average once a month. Use a

copyright or other rights of third parties are

cotton bud slightly moistened with alcohol or a

not infringed.

special head cleaning fluid to clean the deck.

• This deck is not suitable for recording on

I. Open the cassette door by pressing STOP/

CHROME (IEC II) orMETAL (IEC IV) type

EJECT.

cassettes. For recording, use NORMAL type

2. Press PLAY and clean the rubber pressure

cassettes (IEC I) on which the tabs have not

rollers C .

been broken.

3. Press PAUSE and clean the magnetic heads

• The best recording level is set automatically.

A and also the CapstanB.

Altering the VOLUME controls will not affect

4. After cleaning, press STOP/EJECT.

the recording in progress.

Note: Cleaning of the heads can also be done

• At the very beginning and end of the tape,

by playing a cleaning cassette through once.

no recording willtake place during the 7

7

3479.indd 73479.indd 7 11.04.2006 16:36:1311.04.2006 16:36:13