Vitek VT-1656: 18. Indications on the display 19. Care and cleaning 14. Quick cooking mode 15. Viewing the current cooking mode 16. Child lock function 17. Auto power level reduction function

ENGLISH

• Press the (9) "MEMORY" button for confirmation.

18. Indications on the display

• To recall the desired program from memory, press

• In standby mode, the display shows the current time

the (9) "MEMORY" button and choose the program

and the separation dots (9) blink.

number  "1", "2" or "3".

• While entering information, the screen will display

• Press the "START/+30SEC./CONFIRM" button to

the corresponding information and symbols.

begin the cooking process.

• During the cooking process, the display will show

The display will show the remaining cooking time and

the remaining cooking time.

the corresponding symbols for set program.

• During the cooking process, the mode symbols will

When the cooking process has finished, the oven will

blink; when stopped, the symbols will stop blinking.

turn off and beep five times.

Note: "DEFROST" mode is not a food preparation pro

19. Care and cleaning

gram and cannot be saved into memory.

• Turn off the oven and disconnect from electrical

power before cleaning.

14. Quick cooking mode

• Do not allow moisture to contact the control panel.

Press the (11) "START/+30SEC./CONFIRM" button to

Clean it with a soft, lightly dampened paper towel.

begin cooking at full power for 30 seconds; each con

• Keep the oven's cooking chamber clean. If pieces of

secutive key press will add 30 seconds. The maximum

food or liquid sprays are left on the chamber walls,

time that can be set is 99 minutes and 99 seconds.

remove them with a damp paper towel.

Note: during the cooking process, time can be added

• A mild cleanser may be used if the chamber

by pressing the "START/+30SEC./CONFIRM" button.

becomes exceptionally dirty.

When cooking food in multistage mode and automatic

• Do not use abrasive cleaning instruments or wire

mode  time cannot be added.

brushes to clean the inside or outside of the oven.

When the cooking process has finished, the oven will

Make sure that no water or cleanser gets in any of

turn off and beep five times.

the ventilation or steam release openings on the top

of the microwave oven.

15. Viewing the current cooking mode

• Do not use ammoniabased cleansers.

• During singlestage cooking, press the (2)

• The outer surfaces should be cleaned with a damp

"MICROWAVE" button once; for 2 or 3 seconds the

paper towel.

display will show the current power level setting.

• The oven door should always be clean. Do not allow

• During singlestage cooking, press the (4)

crumbs of food to buildup between the door and

"CLOCK/PRESET" button to view the cook start

the front panel of the oven; this may prevent normal

time. For 2 or 3 seconds, the display will show the

closure of the door.

programmed cook start time.

• Clean the ventilation openings on top of the oven

housing regularly  keep them free of dust and dirt.

16. Child lock function

• Regularly remove and wash the glass tray and its

To lock: press and hold the (6) "STOP/CLEAR" button

base  wipe the oven chamber floor clean.

for 3 seconds; the oven will beep and the symbol (5) will

• Wash the glass tray and rotating drive mechanism in

appear on the display.

water with a neutral soap solution. These parts are

To unlock: While locked, press and hold the

dishwasher safe.

"STOP/CLEAR" button for 3 seconds; the oven will

• Do not submerse the glass tray in cold water if it is

beep and the symbol (5) will disappear.

still hot: the sudden drop in temperature can cause

the glass tray to break.

17. Auto power level reduction function

During the cooking process if the oven operates for

more than 30 minutes at maximum power, it automati

cally reduces the power level to 80% of maximum.

Automatic power level reduction is necessary in order to

prevent overheating of the magnetron.

12