Vitek VT-8215 JR: Nozzle Overheating protection CLEANING AND CARE STORAGE

6

–

This model has a “cool” air function, use it to fix your

hairstyle. To switch “cool” air supply on press and hold

down the button (2).

–

After unit operation, switch the hairdryer off by setting

the switch (1) to the position «0» (the hairdryer is off),

and unplug it.

Nozzle

This model includes a nozzle (3). Use the nozzle when you

need to focus the power of drying on a small area (for exam-

ple, a curl or a wave) or when you want to straighten wavy hair.

–

Attach the nozzle (3) to the unit body. The nozzle (3)

allows directing a narrow air flow of high intensity at a

definite hair lock.

–

Insert the power plug into the mains socket. Use the

switch (1) to set the necessary operation mode.

Overheating protection

Overheating protection switches the hairdryer off if the

outgoing air flow is too hot. If the hairdryer is switched off

during operation, set the switch (1) to the position «0» (“the

hairdryer is off”), unplug the hairdryer and make sure that

the inlets and outlets are unblocked. Let the hairdryer cool

down for 5-10 minutes and switch it on again. Do not block

the air inlets during unit operation and avoid getting of hair

into its air inlet.

CLEANING AND CARE

–

The hairdryer is intended for household use only.

–

Set the switch (1) to the position «0» (“the hairdryer is

off”), and disconnect the hairdryer from the mains.

–

You may wipe the unit body with a damp cloth and then

wipe it dry.

–

Clean the air inlet grid (4) with a brush.

–

Never immerse the unit into water or other liquids.

–

Do not use abrasives and solvents to clean the unit body.

STORAGE

–

Unplug the hairdryer if you are not using it.

–

Let the hairdryer cool down after its usage, keep the unit

away from children in a dry cool place.

–

Never wind the cord around hairdryer, as this can dam-

age the cord. Handle the power cord with care, do not

VT-8215_IM_70x130.indd 6 14.06.2016 15:55:05