Vitek VT-5010 SR: SETUP YOUR TV USING YOUR TV

ENGLISH

SETUP YOUR TV

PRESET

Press the Menu button to enter setup menu:

Use the CH button to choose one of these parameters:

Program number (Position), Remember, Band, Swap, Fine

PICTURE

Tuning, Search, Autosearch. Then use the VOL+ and VOL

Adjust the image quality.

buttons to set the desired parameters according to each

Press the CH button to choose the mode: CONTRAST,

menu item.

BRIGHT, COLOR, SHARP.

Then use the VOL+ and VOL buttons to adjust the image

USING YOUR TV

quality; increase (V+) or decrease (V) the parameters.

Connect the television to the AC power supply and press the

POWER button in order to turn on the television. Extend the

OPTION

antenna fully and point it in the needed direction. Choose

Press the CH button to choose the mode: LANGUAGE, CAL

the desired channel using the CH

#

/CH

$

buttons or

ENDAR, GAME

numerical keys on the remote control unit. Set the desired

volume using the VOL+

#

/VOL

$

buttons.

LANGUAGE

Change the length, angle and direction of the antenna in

Using the VOL+ and VOL buttons you can choose the menu

order to achieve better image quality.

language: English, Italian, Spanish, Portugal, German,

Note

Arabic, Chinese or Russian.

• Use an external antenna in areas with poor signal recep

tion.

CALENDAR

• Stow the antenna after turning off the television.

Using the VOL+ and VOL buttons enter the "calendar"

menu. Press the CH buttons to choose the year, press VOL

USING AN EXTERNAL ANTENNA

buttons to choose month. Press the POWER button to exit

For best signal reception, connect the television to an exter

the calendar.

nal antenna suing the antenna adapter.

GAME

LISTENING WITH HEADPHONES

Using the VOL+ and VOL buttons enter the "game" menu.

Headphones (3.5 mm) connect to the jack located on the

To control the figures, use VOL (move left), VOL+ (move

backside panel of the television.

right), CH (speed up) and CH+ (rotate 360°). Press the

POWER button to exit the game.

MALFUNCTIONS AND SOLUTIONS

Carryout the following recommendations before contacting

CLOCK

a service center.

Press the CH button to choose the mode: Time, On Time, Off

time, Attention, Channel time, Position. Use the VOL  button

Condition Cause of malfunction

to set the hours and the VOL+ button to set the minutes.

No image or sound • The power cord is incorrectly con

Note: set the current time first and then the other parame

nected

ters.

• The television is off

No image • The channel is not tuned properly

SYSTEM

Adjust the display system.

Press the CH buttons, choose the mode: Color system,

No sound • The volume is not set correctly

Sound system, Blue background, Picture mode.

•The headphones are not connected

• Weak signal

Use the VOL+ and VOL buttons to choose the sound best

suited for the current channel.

The image is too dark • The brightness and contrast are

not set correctly

Using the VOL+ and VOL buttons you can turn the blue

Fuzzy image or • The antenna is not positioned

background on/off when there is no signal.

"snowlike" static correctly

• The television is located near

Press the CH button to choose one of Picture mode param

a building, high voltage lines,

eters:

construction site, neon light or trains

Horizontal, Vertical, Zoom. Then use the VOL+ and VOL but

tons to set the desired parameters for each menu item.

6