Vitek VT-3508: CLOCK RADIO WITH ALARM AND PROJECTOR MODEL: VT-3508 SETTING THE PROJECTED TIME SETTING THE ALARM TIME WAKING UP TO THE RADIO AC POWER SUPPLY WAKING UP TO BUZZER ALARM TURNING OFF THE ALARM CLOCK SNOOZE MODE

ENGLISH

CLOCK RADIO WITH ALARM AND PROJECTOR

THE CURRENT TIME ON THE CLOCK AND THE

MODEL: VT-3508

PROJECTED TIME ARE SET SEPARATELY.

1. POWER SELECTOR (AUTO/ON/OFF)

SETTING THE PROJECTED TIME

2. LED INDICATOR

 To project the current time onto the wall, point

3. AUTO MODE INDICATOR

the projector away from itself and into a horizon-

4. SNOOZE BUTTON

tal position.

5. ALARM SET/OFF

 Turn on the projector using the PROJECTION

6. TIME SET BUTTON

ON/OFF (18) button; use the FOCUS (23) dial to

7. SLEEP BUTTON

achieve a sharp image on the wall.

8. LOW/HIGH DIMMER SWITCH

 To set the current time on the projector, press

9. HOUR BUTTON

and hold the TIME (20) button, then use the MIN

10.MIN BUTTON

(22) and HOUR (21) buttons to set the current

11.VOLUME DIAL

time.

12.BAND SELECTOR (AM/FM)

13.TUNING DIAL

NOTE: THE PROJECTION DISTANCE OF THE

14.BACKUP BATTERY COMPARTMENT

TIME IN A DARK ROOM IS FROM 0.9 TO 2. 7 m.

15.FM-ANTENNA

16.POWER CORD

SETTING THE ALARM TIME

17.RADIO FREQUENCY SCALE

 Press and hold the ALARM (5) button; use the

18.PROJECTION ON/OFF BUTTON

HOUR (9) and MIN (10) buttons to set the

19.PROJECTOR

desired alarm time.

20.PROJECTOR TIME SET BUTTON

21.HOUR BUTTON

WAKING UP TO THE RADIO

22.MIN BUTTON

 Set the alarm time as instructed above.

23.FOCUS DIAL

 Set the AUTO/OFF/ON (1) selector to the On

24.ALARM RADIO/BUZZ SELECTOR

position.

 Tune the radio to the desired station and adjust

AC POWER SUPPLY

the volume.

Before connecting, make sure that the electrical

 Set the ALARM RADIO/BUZZ (24) selector to

supply voltage is compatible with the devices

RADIO.

voltage requirements.

 Set the AUTO/ON/OFF (1) selector to AUTO.

The alarm will activate at the pre-set time and

CAUTION

will automatically turn off after 1 hour and 59

 Remove the AC plug from the outlet if the device

minutes.

will not be used for a long period of time.

 Do not attempt to repair this device yourself;

WAKING UP TO BUZZER ALARM

there are no user-serviceable parts inside.

 Set the alarm time as indicated above.

 Do not allow water to splash or spill onto the

 Rotate the VOLUME/BUZZ (24) dial counter-

device in order to avoid fire and electric shock.

clockwise until it clicks in order to activate the

 Do not obstruct the natural ventilation of the

BUZZ alarm mode.

device; do not place it in closed bookshelves or

 Set the Auto/Off/On (1) selector to Auto. The

on shelves were there is not good ventilation.

buzzer alarm will activate at the set alarm time.

 Do not place sources of open flames, like can-

dles, on the device.

TURNING OFF THE ALARM

 In case of malfunction, contact an authorized

 Press the ALARM SET/OFF (5) button to turn off

service center.

the alarm; the set alarm time remains saved for

use the next day.

CLOCK

 Set the AUTO/ON/OFF (1) selector to the OFF

 Open the battery compartment (14) and install

position to turn off the alarm permanently.

one 6F-22 type 9V battery (not included). The

battery is used to save information regarding the

SNOOZE MODE

current time and alarm settings in case of AC

 You can temporarily silence the alarm (buzzer or

power interruption.

radio) by pressing the Snooze (4) button; the

 Set the AUTO/OFF/ON (1) selector to the Off

alarm will automatically activate again in 9 min-

position and plug the power plug into the outlet;

utes.

the display will start to blink.

 To set the current time, press and hold the TIME

(6) button, then use the HOUR (10) and MIN (9)

buttons to set the current time.

3