Vitek VT-3473: MP3 DISC PLAYBACK MP3 PROGRAM PLAYBACK PROGRAM MODE

ENGLISH

In play mode In stop mode

MP3 DISC PLAYBACK

9

Press once Press twice Press once

1. Set the Function switch (23) into CD position.

Back to the Previous track Previous track

2. If there is no disc inside, or the disc is damaged or

begining of

inserted incorrectly, "no" will appear on the LED display.

the current

track

Loading a Disc

:

Next track Next track

1. Open the CD compartment door (5).

2. Insert the disc and close the door.

The system starts reading the disc.

To search by music fragment, press and hold the NEXT but

Note: Make sure that the disc is inserted correctly.

ton (8) to search forward, or the BACK button (7) to search

This device supports CDR / RW discs.

backward.

NOTE: When searching by music fragment, the track will be

Playing Discs

played in the Fast Play mode.

1. Press the FOLDER UP or DN buttons (13) or (14) to

choose the desired folder.

To repeat a track or entire disc

2. To select the desired track, press the NEXT (7) or BACK

•

Press the PLAY MODE button (16), to activate the

(8) button.

REPEAT function for the current track.

3. To start playback, press the PLAY/PAUSE button (10).

•

Press the button again to activate the REPEAT ALL

tracks function.

Pause Playback

•

Turn off the REPEAT function by pressing the PLAY

To pause playback, press the PLAY/PAUSE button (10) dur

MODE button (16) again.

ing the disc playback. To resume playback, press the

PLAY/PAUSE button (10) again.

Random Playback Function

To activate the random playback mode, in the CD stop mode

Stop playback

press the PLAY MODE button (16) three times, ("RANDOM"

To stop playback, press the STOP button (11).

will appear on the LED display), after which press the

PLAY/PAUSE button (10). To turn off the function, press PLAY

MP3 PROGRAM PLAYBACK

MODE button (16) once again.

The player allows programming up to 10 MP3 tracks in any

order.

PROGRAM MODE

1. When the CD stop mode press the PROG button (17)

The device allows programming tracks (up to 20 tracks) in

once.

any order, first select the CD Stop mode by pressing the

2. Press FOLDER UP (13) or FOLDER DN (14) button to

STOP button.

select the needed folder.

1. Press the PROG button. (17) once. ("PROG" will flash on

3. Press the NEXT (8) or (7) button to select a track

the LED display.)

4. Again press the PROG button (17) to include the selected

2. Press the NEXT (8) or BACK (7) button to select a

track into the program.

desired track.

5. To continue programming, repeat the steps 2 and 3.

3. Press the PROG button. (17) to add the selected track to

Programming is finished

the program.

6. To start the program playback, press the PLAY/PAUSE

4. Continue programming, repeating steps 2 and 3.

button (10).

Programming is finished.

5. To start playback, press the PLAY/PAUSE button (10).

Viewing the program

Press the PROG. button (17). The numbers of programmed

Viewing the program

tracks will be shown on the display.

Press the PROG button. (17). Numbers of programmed

tracks will be shown on the LED display.

Clearing the program

To clear the program, press the STOP button (11) or open

Clearing the program

the CD compartment door..

To clear the program from the memory, press the STOP but

ton (11) twice or open the CD compartment door

6