Vitek VT-1763: FOR HOUSEHOLD USAGE ONLY USING THE HUMIDIFIER

ENGLISH

• Before using the unit, closely examine the

5. Switch on the humidifier, by pressing the

power cord and make sure that it is not

(6) “Power” on/off button, the intensity

damaged. Do not use the unit, if its power

indication (22), steam-out level indication

cord is damaged.

(20, 24) and relative indoor humidity indi-

• Do not disassemble the unit yourself, if

cation (23) will light up.

any malfunction is detected, apply to the

nearest authorized service center.

Note:

• Regularly clean the unit; be careful not to

- irrespective of the operation mode the

make any scratches on the nebulizer.

display lightning (7) switches off in 8

• Store the unit out of reach of children.

seconds, in order to see the current

mode press any button on the control

FOR HOUSEHOLD USAGE ONLY

panel or remote control.

- minimal possible indication of indoor

USING THE HUMIDIFIER

relative humidity is 40%.

Unpack the unit and remove the packing

materials. Examine the unit for damages. Do

6. Establish steam-out intensity with steam-

not switch on the unit if there are any dam-

out intensity button (1), that will be showed

ages in it.

on the display (7) by changing indication

(20) and (24).

Note:

7. You can set a necessary indoor humidity

- if the unit was subjected to negative

level (from 40% to 80%, setting step 5%)

temperatures, before switching it on

with the help of buttons (2,3), the display

for the first time, keep it at room tem-

(7) will show indication (21) and blinking

perature for 30 minutes.

indications of the set humidity (23). In 5

- use the unit at temperatures from +5 to

seconds on the display (7) indications

+40°С, and relative humidity less than

(22, 27) will lighten up and relative indoor

80%.

humidity indication (23) will lighten up.

- water temperature should not exceed

To switch off the automatic indoor humid-

+40°С.

ity maintenance mode, press button (2)

or (3) until symbols « - - » appear on dis-

Before switching on the unit, make sure that

play (7).

you home electricity supply corresponds

8. To switch on the ionization mode, press

to the voltage specified on the body of the

button (4), indication (26) will appear on

unit.

the display (7). To switch off the ionization

mode, press button (4) once again, the

1. Take the handle (10) and remove the wa-

indication (26) will disappear.

ter tank (11) from the body (16).

9. You can set up operation time of the unit

2. Turn over the tank (11); unscrew the lid

using the (5) Timer button. Press button

(14), by turning it counterclockwise. Fill

(5) to set the required operation time of

the water tank (11) with necessary quan-

the unit from 1 to 12 hours, it will be re-

tity of water and screw the lid on (14) turn-

flected on the display (7) by indications

ing it clockwise.

(25) or digital indication (23).

3. Set the filled tank (11) on the body of the

10.When the water tank becomes empty

unit (16). Wait for some time, which is

(11), on the display (7) indication (28) will

necessary to fill the operating chamber

light up, you will hear sound signals and

with water.

the humidifier will switch off.

4. Plug in the humidifier, you will hear a

11.After the end of the work switch off the

sound signal.

unit pressing button (6).

4

4

1763.indd 41763.indd 4 10.06.2010 14:12:4810.06.2010 14:12:48