Vitek VT-1468 BD: DESCRIPTION SAFETY MEASURES

3

BLENDER VT-1468 BD

• Before using the unit for the first time, thor-

The blender VT-1468 BD is included into the

oughly wash all the removable attachments

blender set and intended for whisking, mixing,

and containers that will contact food.

chopping and combined processing of liquid and

• Place the chopper bowl on a flat stable sur-

solid products.

face.

• Products should be put into the chopper bowl

DESCRIPTION

before the unit is switched on.

1. Detachable blender attachment

• Do not overfill the chopper bowl with products

2. Motor unit

and watch the level of poured liquids.

3. Mode «II» button

• The cutting blades of the chopping knife and

4. Mode «I» button

of the blender attachment are very sharp and

5. Speed control knob

dangerous. Handle these attachments very

6. Chopper bowl

carefully!

7. Chopping knife

• If rotation of the chopping knife is hindered

8. Geared lid

during the operation of the chopper, unplug

9. Rubberized base

the unit and carefully remove products that

10. Measuring cup

prevent blade rotation.

11. Whisk attachment

• Remove products and pour out liquids from

12. Whisk gear

the chopper bowl only after complete stop of

the chopping knife.

ATTENTION!

• Do not touch the rotating parts of the unit.

For additional protection it is reasonable

Do not let hair or free hanging clothes get into

to install a residual current device (RCD) with

the rotation area of the blender attachment

nominal operation current not exceeding

knife or whisk.

30 mA. To install an RCD contact a specialist.

• Unplug the unit every time before cleaning or

when you are not using it.

SAFETY MEASURES

• Unplug the unit by taking the power plug

Before using the unit, read these instructions

directly.

carefully and keep them for future reference.

• Do not pull the power cord and do not twist it.

Use the unit for intended purposes only, as speci-

• Do not put the attachments and the bowls in

fied in this manual.

a dishwashing machine.

Mishandling the unit can lead to its breakage

• Do not use the unit near hot surfaces (such as

and cause harm to the user or damage to his/

gas or electric stove, oven).

her property.

• Provide that the power cord does not touch

• Before connecting the unit to the mains, make

sharp edges of furniture and hot surfaces.

sure that the voltage specified on the unit cor-

• Do not touch the motor unit body, the power

responds to your home mains voltage.

cord and the plug with wet hands.

• Never leave the unit connected to the mains

• Do not use the unit if the power cord or power

unattended.

plug is damaged.

• Always unplug the unit before changing the

• For children safety reasons do not leave poly-

attachments.

ethylene bags used as a packaging unat-

• Before using the unit, make sure that the

tended.

attachments are set properly.

Attention! Do not allow children to play with

• Do not connect the motor unit to the mains if

polyethylene bags or packaging film. Danger of

the attachments are not installed.

suffocation!

• It is not allowed to switch the unit on without

• Do not allow children under 8 years of age

attachments and products for processing.

to touch the body of the motor unit, the power cord

• Do not use the unit outdoors.

or the power plug during operation of the unit.

• Cool down hot products before putting them

• Do not leave children unattended to prevent

into the measuring cup or the chopper bowl.

using the unit as a toy.

• Do not place the chopper bowl and the mea-

• Close supervision is necessary when children

suring cup into a microwave oven.

under 8 years of age or disabled persons are

• Use only the attachments supplied.

near the operating unit.

VT-1468.indd 3 08.02.2016 10:23:42