Vitek VT-1256: STEAM CHAMBER CLEANING STORAGE TECHNICAL CHARACTERISTICS GUARANTEE CARE AND CLEANING

ENGLISH

STEAM CHAMBER CLEANING

• Avoid touching the iron sole with sharp

To prolong lifetime of the iron we recommend

metal objects.

cleaning the steam chamber, especially in the

regions with “hard” water.

STORAGE

•

Set the steam supply regulator (3) to the

• Turn the temperature regulator (10) anti-

off position.

clockwise till MIN position, set the steam

• Fill the water tank (11) till the MAX mark

release regulator (3) to the steam OFF po-

(13).

sition.

• Put the iron on the base (8).

• Remove the power plug from the outlet.

• Insert the power plug into the outlet.

• Let the unit cool down.

• Set the temperature regulator (10) to the

• Open the water tank lid (2), turn over the

MAX. temperature, the (9) indicator will

iron and drain any remaining water from

light up (Pic.3).

the water tank (11) (pic. 8).

• When the sole temperature (12) reaches

• Close the lid (2).

the desired temperature value, the (9) indi-

• Store the iron vertically in a dry coo, place

cator will go out, you can start cleaning of

out of the reach of children.

the iron chamber.

• Unplug the iron, set the temperature regu-

Delivery set

lator (10) to the «MIN» position.

1. Iron – 1 pc.

• Pull the plug out of the socket.

2. Water bowl – 1pc.

• Hold the iron above the sink horizontally,

press and hold the SELF CLEAN button

TECHNICAL CHARACTERISTICS

(pic.7).

Power requirements: 220V -240 V ~ 50 Hz

• Boiling water together with scale will be

Power consumption: 2000 W

throwing out from the openings in the iron

sole (12).

Specifications subject to change without prior

• Slightly sway the iron back and forth, until

notice.

water goes out of the water tank (11).

• Place the iron on the base (8) and let it cool

Service life of appliance - 3 years

down completely.

• When the sole (12) cools down completely,

GUARANTEE

wipe it with a dry cloth.

Details regarding guarantee conditions can

• Before you take the iron for storing, make

be obtained from the dealer from whom the

sure that there is no water in the water tank

appliance was purchased. The bill of sale or

(11) and that the iron sole (12) is complete-

receipt must be produced when making any

ly dry.

claim under the terms of this guarantee.

CARE AND CLEANING

This product conforms to the EMC-

• Before cleaning the iron, make sure that it

Requirements as laid down by the

is turned off and has cooled completely.

Council Directive 89/336/EEC

• Wipe the iron’s outer surface with a damp

and to the Law Voltage Regulation

cloth and then wipe dry.

(73/23 EEC)

• Sediment on the iron sole can be removed

with a cloth soaked in vinegar-water solu-

tion.

• After removing sediment, polish the sole

with a dry cloth.

• Do not use abrasive substances to clean

the sole and body of the iron.

7

1256.indd 71256.indd 7 25.03.2010 11:37:2025.03.2010 11:37:20