Vitek VT-1254: VERTICAL STEAMING TECHNICAL CHARACTERISTICS GUARANTEE CARE AND CLEANING STORAGE

ENGLISH

(3) is pressed, steam will be vigorously re-

release regulator (6) to the left position -

leased from the openings in the iron sole

steam supply OFF position.

(pic.4).

• Remove the power plug from the outlet.

• Open the water tank lid (4), turn over the

Note: In order to avoid leakage of water

iron and drain any remaining water from

from steam openings, press the addi-

the water tank (pic. 6).

tional steam supply button (3) with 5-6

• Close the lid (2).

sec. interval.

• Set the iron vertically and allow it to cool

completely.

VERTICAL STEAMING

• Store the iron vertically.

Vertical steaming function can be used

only when the high temperature mode is

Delivery set

used (set the temperature regulator (8) to

1. Iron – 1 pc.

«•••»).

2. Water tank – 1pc.

• Hold the iron vertically at the distance10-

3. Travel pouch – 1pc.

20 cm from the clothes press the addi-

4. Instruction manual – 1 pc.

tional steam release button (3), steam will

be released from the sole (1) (pic. 5).

TECHNICAL CHARACTERISTICS

Power requirements:

Important information

110-120/220-240 V, ~ 50/60 Hz

• Vertical steaming is not recommended

Power consumption: 840-1000 W

for synthetic fabrics.

• To avoid melting the fabric, do not touch

Specifications subject to change without

the iron sole to the item while steaming.

prior notice.

• Never steam iron clothing on a person as

the steam temperature is very high and it

MINIMUM SERVICE LIFE - 3 YEARS

can cause burns. Use a coat-hanger or a

stand.

GUARANTEE

Details regarding guarantee conditions can

CARE AND CLEANING

be obtained from the dealer from whom the

• Before cleaning the iron, make sure that it

appliance was purchased. The bill of sale or

is turned off and has cooled completely.

receipt must be produced when making any

• Wipe the iron's outer surface with a damp

claim under the terms of this guarantee.

cloth and then wipe dry.

• Sediment on the iron sole can be removed

This product conforms to the

with a cloth soaked in vinegar-water solu-

EMC-Requirements as laid down

tion.

by the Council Directive 89/336/

• After removing sediment, polish the sole

EEC and to the Law Voltage

with a dry cloth.

Regulation (73/23 EEC)

• Do not use abrasive substances to clean

the sole and body of the iron.

• Avoid touching the iron sole with sharp

metal objects.

STORAGE

• Turn the temperature regulator (8) anti-

clockwise till MIN position, set the steam

7

1254.indd 71254.indd 7 29.01.2009 14:26:2029.01.2009 14:26:20