Vitek VT-1254: SETTING THE IRONING TEMPERATURE STEAM IRONING IRONING ATTENTION! ADDITIONAL STEAM SUPPLY

ENGLISH

SETTING THE IRONING TEMPERATURE

STEAM IRONING

• If the handle (5) is at a low position, raise

For steam ironing set the temperature regu-

it, it will fix.

lator to «•••».

•

Unwind the power cord and insert the

• If the handle (5) is at a low position, raise

plug into the socket.

it, it will fix.

• Set the temperature regulator (8) to the

• Fill the tank with water as described

required ironing temperature: “•”, “••”,

above.

“•••” (depending on the type of fabric)

•

Unwind the power cord and insert the

(pic. 2), the indicator (7) will light up.

plug into the socket.

• Set the iron vertically.

• Set the switch (6) to the steam off posi-

• When the sole temperature (1) reaches

tion.

the desired temperature value, the indi-

• Set the temperature regulator (8) to the

cator (7) will go out, you can start iron-

required ironing temperature: “•••” (pic.

ing.

2), the indicator (7) will light up.

• Set the iron vertically.

IRONING

• When the sole temperature (1) reaches

• If the handle (5) is at a low position, raise

the desired temperature value, the indi-

it, it will fix.

cator (7) will go out, you can start iron-

• Unwind the power cord and insert the

ing.

plug into the socket.

• Switch on the steam supply, by setting of

• Set the temperature regulator (8) to the

the switch (6) to the steam supply On po-

required ironing temperature: “•”, “••”,

sition.

“•••” (depending on the type of fabric)

• After you finish ironing set the regulator

(pic. 2), the indicator (7) will light up.

(8) to the MIN position, and the switch (6)

• Set the iron vertically.

to the steam supply Off position.

• When the sole temperature (1) reaches

the desired temperature value, the indi-

Note: Always unplug the iron, if you are

cator (7) will go out, you can start iron-

not going using it even for a short period

ing.

of time.

• After you finish ironing set the regulator

(8) to the MIN position.

• Unplug the unit and let it cool down com-

pletely.

Note: Always unplug the iron, if you are

• Open the lid (4) and pour out water.

not going using it even for a short period

• Press the button (2) and lower the handle

of time.

(5) (pic. 3).

• Pull the plug out of the socket and let the

ATTENTION!

iron cool down completely.

If during the operation steam is not con-

• Press the button (2) and lower the handle

stantly supplied, check whether the tem-

(5) (pic. 3).

perature regulator (8) is set properly.

Note:

ADDITIONAL STEAM SUPPLY

While using the unit for the first time,

Additional steam supply function is useful

the heating element burns, that is why

when ironing folds and can only be used at

smoke or strange smell can appear – it

high ironing temperatures (when the iron

is normal.

temperature regulator (8) is set to “•••”.

When the additional steam supply button

6

1254.indd 61254.indd 6 29.01.2009 14:26:2029.01.2009 14:26:20