Vitek VT-7123 ST: COFFEE GRINDER VT-7123 ST DESCRIPTION SAFETY MEASURES
COFFEE GRINDER VT-7123 ST DESCRIPTION SAFETY MEASURES: Vitek VT-7123 ST
Table of contents
- COFFEE GRINDER VT-7123 ST DESCRIPTION SAFETY MEASURES
- BEFORE THE FIRST USE
- Continuous operation time USAGE CLEANING
- STORAGE DELIVERY SET TECHNICAL SPECIFICATIONS

ENGLISH
COFFEE GRINDER VT-7123 ST
• Do not leave the operating unit
The unit is intended for grinding cof-
unattended.
fee beans only.
• Always unplug the unit if you are
not using it.
DESCRIPTION
• Do not touch the knives cutting
1. Body
edges; they are very sharp and
2. Process chamber
dangerous!
3. Lid
• If the knives stop rotating sud-
4. ON button
denly, unplug the unit first
5. Cord storage
and only after that remove the
ingredients that block knives
ATTENTION!
rotation.
For additional protection it is rea-
• Do not overload the process
sonable to install a residual current
chamber with food products.
device (RCD) with nominal opera-
• Continuous operation time of
tion current not exceeding 30 mA.
1 operation cycle should not
To install an RCD contact a spe-
exceed 30 seconds. Make a
cialist.
1-2 minute break between
operation cycles.
SAFETY MEASURES
• Do not switch the unit on with-
Read this instruction manual care-
out food.
fully before using the unit and keep
• Remove the lid from the motor
it for the whole unit operation period.
unit and remove the products
Use the unit for its intended purpose
only after complete stop of
only, as specified in this manual.
knives rotation.
Mishandling the unit can lead to its
• When disconnecting the power
breakage and cause harm to the
plug from the mains, do not pull
user or damage to his/her property.
the cord, but hold the plug with
• Before connecting the unit to the
your hand.
mains, make sure that the volt-
• Do not touch the coffee grinder
age specified on the unit cor-
body and the power plug with
responds to your home mains
wet hands.
voltage.
• Do not use the unit near a kitch-
• Place the unit on a flat moisture-
en sink, do not expose the unit
resistant surface away from heat
to moisture.
sources and open flame.
• To avoid electric shock, do not
• Make sure that the power cord
immerse the power cord, the
does not contact with hot sur-
power plug or the coffee grind-
faces and sharp furniture edges.
er body into water or any other
• Do not use the unit outdoors.
liquids.
3
IM VT-7123.indd 3 16.06.2016 15:10:09




