Vitek VT-4037 BN: SYSTEM OPERATION RESOLVING MALFUNCTIONS

ENGLISH

Make sure that the device connected to the subwoofer (DVD player,

panel will show the volume level of the rear speakers in a numeri

for example) is turned off. Set the overall system volume to a mini

cal format.

mum before making connections.

1. Open the lid of the battery compartment on the remote control

F. FRONT SPEAKERS

unit and insert the batteries, according to proper polarity.

1. Press the FRONT + button on the remote control unit to increase

2. Connect the wires from the front left and right satellite speakers,

the volume level on the front speakers; the display on the front

the central speaker, and the rear left and right satellite speakers

panel will show the volume level of the front speakers in a numer

to the output jacks on the rear panel of the subwoofer marked

ical format.

FR, FL, CEN, RR, and RL.

2. Press the FRONT  button on the remote control unit to decrease

3. Using an audio cable, connect any 2channel audio source (CD

the volume level on the front speakers; the display on the front

player, for example) to the 2.1 CH INPUT jacks and any 6channel

panel will show the volume level of the front speakers in a numer

audio source (for example, a DVD player with builtin AC3/Dolby

ical format.

Digital decoder) to the 5.1 CH INPUT jacks on the subwoofer.

4. Connect the power cord to an electrical outlet and set the power

G. AUDIO SOURCE SELECTION  2.1 CH or 5.1 CH

switch, located on the rear panel of the subwoofer, to the ON

1. Connect the system correctly to the audio source.

position. Start playback on the connected audio source and use

2. Press the CD/DVD button on the remote control unit or on the

the volume control, located on the remote control unit or on the

front panel of the subwoofer to select the audio source (2.1 CH

front panel of the subwoofer, to set the desired volume level.

or 5.1 CH).

SYSTEM OPERATION

H. MUTE FUNCTION

A. TURNING THE POWER ON / OFF

1. Press the MUTE button on the front panel or on the remote con

1. Make all the necessary connections in accordance with the setup

trol unit to turn off the sound.

instructions before turning on the device.

2. The MUTE indicator will appear on the front of the subwoofer.

2. Connect the system's power cord to an electrical outlet. (ATTEN

3. Press the MUTE button again to turn on the sound.

TION: The power source should conform to the device's power

supply requirements).

I. AM/FM TUNER

3. Set the power switch, located on the rear panel of the device, to

Connect the AM and FM antennas to their respective jacks locat

the ON position. Press the STANDBY button, located on the

ed on the rear panel of the subwoofer.

remote control unit or on the front panel of the device, to turn on

1. Press the INPUT button on the remote control unit or on the front

the device's power.

panel until the subwoofer’s display shows the “TUNE” indicator.

3. Use the FM/AM button located on the remote control unit to

B. VOLUME

choose the desired band (FM or AM).

1. Press the VOL + button on the remote control unit to increase the

4. Press the SCAN button on the remote control unit to activate the

overall system volume; the display on the front panel will show

automatic tuning function. The tuner will tune to a radio station

the overall volume level of the system in a numerical format.

automatically.

2. Press the VOL  button on the remote control unit to decrease the

5. Press the TUNE+ or TUNE button on the remote control unit to

overall system volume; the display on the front panel will show

tune to a radio station manually.

the overall volume level of the system in a numerical format.

6. Press the ST/MN button on the remote control unit while in the

FM band to choose between stereo and mono modes.

C. 3D SOUND MODE

7. To save a chosen radio station into memory, press the MEMORY

1. Connect the center and rear speakers to the system.

button on the remote control unit and then press the desired

2. Press the 3D button located on the remote control unit to turn the

memory location number on the numeric keypad and the station

3D sound on or off.

will be saved into memory. To enter a number of ten or higher,

first press the 10+ button and then a numeric button from 09.

D. CENTER SPEAKER

NOTE: You can save up to 20 radio stations into memory.

1. Press the CEN + button on the remote control unit to increase the

volume level on the central speaker; the display on the front

RESOLVING MALFUNCTIONS

panel will show the volume level of the central speaker in a

1. THERE IS NO SOUND AT ALL

numerical format.

(1) Make sure the system is connected properly.

2. Press the CEN  button on the remote control unit to decrease

(2) Increase the volume.

the volume level on the central speaker; the display on the front

(3) Make sure the audio input is selected properly.

panel will show the volume level of the central speakers in a

(4) Make sure the MUTE function has not been activated.

numerical format.

2. NO SOUND IS COMING FROM THE FRONTLEFT SPEAKER

E. REAR SPEAKERS

(1) Make sure the frontleft speaker is properly connected to the

1. Press the REAR + button on the remote control unit to increase

device.

the volume level on the rear speakers; the display on the front

(2) Make sure the device is properly connected to the audio source.

panel will show the volume level of the rear speakers in a numeri

cal format.

3. NO SOUND IS COMING FROM THE FRONTRIGHT SPEAKER

2. Press the REAR  button on the remote control unit to decrease

(1) Make sure the frontright speaker is properly connected to the

the volume level on the rear speakers; the display on the front

device.

5