Vitek VT-4036 BN: 3. NO SOUND IS COMING FROM THE FRONTRIGHT SPEAKER 4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER 5. NO SOUND IS COMING FROM THE REAR SPEAKERS APPENDIX 6. NO RADIO STATION RECEPTION PRECAUTIONARY MEASURES:

ENGLISH

3. NO SOUND IS COMING FROM THE FRONTRIGHT

Do not install the device on couches, beds or carpets

SPEAKER

because the device's ventilation may be blocked.

(1) Make sure the frontright speaker is properly connected

9. The effects of heat  Do not install the device near heat

to the device.

sources (for example, radiators, kitchen stoves, etc).

(2) Make sure the device is properly connected to the audio

10. Periods of nonuse  if the device will not be used for a

source.

long period of time, disconnect the power plug from the

electrical outlet.

4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER

11. The need for maintenance  Utilize the services of quali

(1) Make sure the central speaker is properly connected to

fied technicians if:

the device.

• The power cord is damaged; or

(2) Make sure the device is properly connected to the audio

• The device body is damaged; or

source.

• The device was subjected to rain; or

(3) Increase the volume of the central speaker.

• The device is not functioning properly; or

• The device was subjected to shock.

5. NO SOUND IS COMING FROM THE REAR SPEAKERS

(1) Maker sure the rear speakers are connected properly.

12. Repair service  The consumer should not attempt to

(2) Make sure the device is properly connected to the audio

repair the device himself. Use only the services of a qual

source.

ified technician.

NOTE: The central and rear speakers only work if the system

13. Clean the device with a dry, soft clothe only.

is connected to a sixchannel audio source (for example, a

14. Turn off the device during thunderstorms or when not in

DVD player with an AC3/Dolby Digital decoder) or, if in 3D

use for a long period of time.

mode, when connected through the 2.1 CH audio input.

APPENDIX

6. NO RADIO STATION RECEPTION

When connecting the device to a DVD player with a builtin

(1) Verify that the antennas are connected to their respective

DD/DTS decoder, verify the following:

jacks on the rear panel.

1. When connected through the 5.1 CH. audio inputs, the 5.1

(2) In the FM band – make sure that the FM antenna is fully

CH audio output should be chosen in the player's set

extended.

tings. Playback discs with AC3/Dolby Digital 5.1 CH

(3) In the AM band – rotate the AM antenna for better signal

audio tracks.

reception.

2. To turn on the subwoofer, make sure that the speaker size

in the player’s settings for the front, central and rear

PRECAUTIONARY MEASURES:

speakers is “Small” and that the subwoofer output is set

to “On.”

Attention: Please carefully read the points listed below to

ensure safe use of the device.

When connecting the device to DVD player, carefully read

the operating instructions for the DVD player.

1. Read the instructions  The safety instructions and oper

ating rules should be read before using the device.

2. Save the instructions  Save the instructions for future

use.

3. Follow the operating rules  All of the safety instructions

should be followed.

4. Warning symbols  Heed the indications of all warning

symbols located on the device's panels or in these

instructions.

5. Power source  The device should only be connected to

a power source with the characteristics indicated on the

rear panel of the device or in these instructions.

6. Protecting the power cord  The power cord should be

laid out in such a way that it will not be damaged by

external items or its surroundings.

7. Water and moisture  Do not use the device near reser

voirs of water (for example, bath tubs, sinks, etc).

8. Ventilation  Install the device in a well ventilated room.

7