Vitek VT-4027-4037: 4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER 5. NO SOUND IS COMING FROM THE REAR SPEAKERS APPENDIX PRECAUTIONARY MEASURES: TECHNICAL CHARACTERISTICS AM/FM Tuner Frequency band: General AM tuner characteristics:

(2) Make sure the device is properly connected to the audio source.

4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER

(1) Make sure the central speaker is properly connected to the

device.

(2) Make sure the device is properly connected to the audio source.

(3) Increase the volume of the central speaker.

5. NO SOUND IS COMING FROM THE REAR SPEAKERS

(1) Maker sure the rear speakers are connected properly.

(2) Make sure the device is properly connected to the audio source.

NOTE: The central and rear speakers only work if the system is con

nected to a sixchannel audio source (for example, a DVD player with

an AC3/Dolby Digital decoder) or, if in 3D mode, when connected

through the 2.1 CH audio input. 

APPENDIX

When connecting the device to a DVD player with a builtin DD/DTS

decoder, verify the following:

1. When connected through the 5.1 CH. audio input, the 5.1 CH audio

output should be chosen in the player's settings. Playback discs with

AC3/Dolby Digital 5.1 CH audio tracks. 

2. To turn on the subwoofer, make sure that the speaker size in the

player's settings for the front, central and rear speakers is "Small"

and that the subwoofer output is set to "On."

When connecting the device to DVD player, carefully read the operat

ing instructions for the DVD player.

PRECAUTIONARY MEASURES:

Attention:

Please carefully read the points listed below to ensure

safe use of the device.

1.  Read the instructions  The safety instructions and operating

rules should be read before using the device.

2.  Save the instructions  Save the instructions for future use.

3.  Follow the operating rules  All of the safety instructions should

be followed.

4.  Warning symbols  Heed the indications of all warning symbols

located on the device's panels or in these instructions.

5.  Power source  The device should only be connected to a power

source with the characteristics indicated on the rear panel of the

device or in these instructions.

6.  Protecting the power cord  The power cord should be laid out in

such a way that it will not be damaged by external items or its

surroundings.

7.  Water and moisture  Do not use the device near reservoirs of

water (for example, bath tubs, sinks, etc).

8.  Ventilation  Install the device in a well ventilated room. Do not

install the device on couches, beds or carpets because the

device's ventilation may be blocked. 

9.  The effects of heat  Do not install the device near heat sources

(for example, radiators, kitchen stoves, etc).

10. Periods of nonuse  if the device will not be used for a long peri

od of time, disconnect the power plug from the electrical outlet.

11. The need for maintenance  Utilize the services of qualified tech

nicians if:

•

The power cord is damaged; or

•

The device body is damaged; or

•

The device was subjected to rain; or

•

The device is not functioning properly; or

•

The device was subjected to shock.

12. Repair service  The consumer should not attempt to repair the

device himself. Use only the services of a qualified technician.

13. Clean the device with a dry, soft clothe only.

14. Turn off the device during thunderstorms or when not in use for a

long period of time.

TECHNICAL CHARACTERISTICS

Power supply: 

~220230 Volts

Output power: 

60 W (Subwoofer) 

+ 5 x 35 W (Satellite speakers) 

Subwoofer speaker: 

8"/4 Om

Satellite speakers: 

2"/8 Om

Channel separation: 

>45 dB

Signal/noise ratio: 

>85 dB

Reproducible frequency band: 

35 Hz  200 Hz (Subwoofer)

150 Hz  20 KHz (Satellite speakers)

AM/FM Tuner

General FM tuner characteristics:

Frequency band: 

87.00 MHz ~108.00 MHz

Frequency tuning step: 

50/100 KHz

Intermediate frequency of oscillation: 

10.7 MHz 

Temperature range: 

5   +70°C

Antenna input impedance: 

75 Om

Signal/noise ratio: 

>45 dB

General AM tuner characteristics:

Frequency band: 

522 KHz ~ 1610 KHz

Frequency tuning step: 

9/10 KHz

Intermediate frequency of oscillation: 

450 KHz

Temperature range: 

5   +70°C 

Signal/noise ratio: 

>45 dB

The technical characteristics of the device may be changed without

prior notice.

Service life – no less than 5 years.

Guarantee 

Details regarding guarantee conditions can be obtained from the

dealer from whom the appliance was purchased. The bill of sale or

receipt must be produced when making any claim under the terms of

this guarantee.

This product conforms to the EMCRequirements as laid

down by the Council Directive 89/336/EEC and to the Low

Voltage Regulation (23/73 EEC)

ENGLISH

6

4027.qxd  04.10.2005  11:16  Page 6