Vitek VT-3790: Handling CDs USB jack MAINTENANCE

ENGLISH

Use the ASP function only when necessary,

Handling CDs

to save the batteries charge.

Handle the discs carefully. Hold discs only

by the edges. Never touch the polished disc

NOTE: When playing MP3 discs, the ASP

surface.

function is constantly turned on, and cannot

Do not stick scotch, stickers, etc., to the

be deactivated.

label side of the disc.

Periodically wipe discs with a soft (not fluffy)

Locking of control buttons (HOLD)

dry cloth. Never use cleaning aerosols or

The device is equipped with control buttons

antistatic agents for cleaning discs. If nec?

lock function ? HOLD (18) To lock the control

essary, buy a special kit for cleaning CDs.

buttons, set the lock switch (19) to "ON".

If the disc skips tracks or gets stuck in cer?

tain spots, then the disc may be dirty or

SD/MMC memory cards jack

damaged (scratched).

In the stop mode insert a SD/MMC card

Wipe discs from center to outer edges in

containing MP3 files into the memory card

straight movements. Never wipe discs in cir?

jack (21). When the STOP button (9) is

cular motion.

pressed for a short time, the "CARD?USB"

To remove the disc from its case, press the

will be shown on the display, and then the

center part of the case and remove the disc,

SD/MMC card contents will be read. The

holding it carefully by the edges.

LED display will show the total number of

Remove fingerprints and dust from the disc

MP3 files in the memory card. To start play?

surface with a soft cloth. Compact discs dif?

back, press the PLAY/PAUSE button (4). To

fer from traditional recordings in that they

activate again the disc playback mode,

do not have any grooves where dust can

press the STOP button (9) for a short time,

collect, so careful cleaning with a soft cloth

the "CD?DISC" mode will be activated.

should remove most of the particles.

USB jack

In the stop mode insert the USB cable (sup?

plied with the device) into the USB jack and

connect a USB flash card to it, containing

MP3 files. . When the STOP button (9) is

pressed for a short time, the "CARD?USB"

will be shown on the display, and then the

flash card contents will be read. The LED

display will show the total number of MP3

files in the memory card. To start playback,

press the PLAY/PAUSE button (4).

To activate again the disc playback mode,

press the STOP button (9) for a short time,

the "CD?DISC" mode will be activated.

MAINTENANCE

Cleaning the device

Wipe the device exterior with a soft cloth

dipped in soapy water.

9