Vitek VT-1761: FOR HOME USE ONLY USE OF HUMIDIFIER

ENGLISH

• Do not dismantle the device on your

5. Turn on the humidifier, by turning the

own, in case of disorder refer to the

handle (2) clockwise, indicator (5) will

nearest authorized service center.

turn green, the spot lighting of regula-

• Clean the device regularly, keep from

tors (1) and (2) and of water tank (17)

scratch appearance on a nebulizer.

will turn on.

• Store the device in places out of reach

6. Establish steam-out intensity by turn-

of children.

ing the handle (2).

7. By a regulator of maintaining relative

FOR HOME USE ONLY

indoor humidity (1) «Humidistat», es-

tablish the boundary value of main-

USE OF HUMIDIFIER

taining indoor humidity from «Min» to

Unpack the device and remove all pack-

«Max».

ing materials. Inspect the device for

damage. If there is any damage do not

«Min» - from 20 % to 30 %;

turn on the device.

«Mid» - from 50 % to 60 %;

«Max» - up to 90 %.

Note:

- if the humidifier was exposed to

Note:

negative temperatures, then be-

- if humidity in a room is higher than

fore the first time use it is recom-

a set one on the control knob(1),

mended that you keep it at room

the moisturizer cannot be turned

temperature during 30 minutes.

on in a steam-out mode .

- use the humidifier at indoor tem-

perature from +5 to +40°С, and rel-

8. To turn on ionization mode push the

ative humidity no less than 80%.

button (3) «ION», in the process the

- the temperature of utilized water

LED light (4) comes on. To turn off

should not exceed +40°С.

ionization mode push the button (3)

one more time, the light (4) goes out.

Before plugging in ensure that the power

9. On completion of work turn off the de-

network voltage corresponds to the op-

vice by setting the control (2) in «OFF»

erating voltage of the device.

position, in the process the LED light

(5) goes out, the booster light of the

1. Take the handle (9) and remove water

control knobs (1) and (2) shuts down.

tank (10) from the body (16).

2. Turn over water tank (10), remove the

Note:

top cover (14), by turning it counter-

- (17)the booster light lamp helps

clockwise. Fill the water tank (10) with

you to estimate the quantity of wa-

the necessary quantity of water and

ter in the reservoir.

secure the top cover (14), by turning it

- if the water in the reservoir (10)

clockwise.

is over, the red LED light (5)

3. Fix the filled water tank (10) to the body

«Humidify/Refill» is on, remove the

of the device (16). Wait till the working

reservoir and fill it with water.

compartment is filled with water.

4. Plug in the humidifier.

4

4

1761.indd 41761.indd 4 04.06.2010 10:20:4504.06.2010 10:20:45