Vitek VT-1415 BK: RECOMMENDED OPERATION MODES

6

• If you press and hold down the “TURBO” but-

• Press the «RELEASE» button (10) and lower

ton (3), the unit will operate at maximum rota-

the support (9) with the installed mixer (4)

tion speed.

until it is fixed.

• After unit operation, set the operation mode

• Insert the power plug into the mains socket.

switch (2) to the position «0» and unplug the

• Switch the mixer on with the operation mode

unit.

switch (2) and select the required attachment

• Press the button (1) to release the installed

rotation speed «1, 2, 3, 4, 5».

attachments (5 or 6).

• If you press and hold down the “TURBO” but-

Attention! Do not press the attachment

ton (3), the unit will operate at maximum rota-

release button (1) during the unit operation.

tion speed.

Attention! Be careful! During the mixer (4)

Using the holding base (12)

operation on the holding base (12) the bowl (7)

To complete more difficult cooking tasks

rotates and the mixer (4) with the support (9)

you can install the mixer (4) on the holding

oscillates horizontally. Do not touch the rotat-

base (12):

ing parts of the unit. Do not let hair or free

Press the «RELEASE» button (10) and lift the sup-

hanging clothes get into the rotation area. Do

port (9) until it is fixed in the upper position (pic. 3).

not let foreign objects get into the bowl.

• Place the mixer bowl (7) on the holding

• After unit operation, set the operation mode

base (12) (pic. 4).

switch (2) to the position «0» and unplug the

• Install the scraper blade (8) in the mixer bowl (7),

unit.

matching the locks on the scraper blade (8) with

• Lift the support (9) with the mixer (4) installed

the grooves on the base (12) (pic. 5, 6).

on it having pressed the release button (10).

• Insert the beaters (5) or the dough hooks (6)

• Hold the mixer (4), then press and hold down

into corresponding mixer (4) sockets until

the release button (11) to remove the mixer

clicking. Both attachments should be fixed

from the support (9) in the upward direction.

properly in the mixer openings (pic. 1, 2).

• Press the button (1) to release the installed

Note: For proper assembling install the attach-

attachments (5 or 6).

ment with a plastic gear (5 or 6) into the mixer

• Remove the bowl (7) from the holding base

body (4) opening marked with a star.

(12) and take products out of it. To remove

• Place the mixer (4) on the support (9) matching

the bowl (7) from the holding base (12) slightly

the locks on the support (9) with the openings

turn it counterclockwise and pull upwards.

on the mixer body (4) and press on the mixer

Notes:

to actuate the locks (pic. 8). The plastic gear

– Maximal continuous operation time is no lon-

on the attachment must match the opening in

ger than 15 minutes; make at least a 30 min-

the support (9) with installed plastic plug. Lift

ute break before switching the unit on again.

the support (9) with the mixer (4) installed on

– Do not block the ventilation openings on the

it having pressed the «RELEASE» button (10).

unit body, this may lead to the electric motor

• Put the necessary ingredients into the bowl (7).

overheating.

RECOMMENDED OPERATION MODES

Attachment

Approximate

Recommended

Product type

rotation

operation

product amount

speed

time

Used attachments: beaters (5)

Beating egg whites 6 4-5 2-4 min.

Whipping cream 300 ml 1-5 4 min.

Mixing ingredients for dough 400 g 1 - 5 1.5 – 2 min

Beating butter 400 ml 4 - 5 1 min.

Mixing butter with flour (if necessary, you

1-2

4 min.

can add some water for getting doughy

150 g

1

1 min.

consistency)

IM VT-1415.indd 6 15.06.2016 10:34:11