Vitek VT-1252: DESCRIPTION SAFETY MEASURES BEFORE USAGE

ENGLISH

STEAM IRON

• Always unplug the unit while filling the

water tank with water.

DESCRIPTION

• While operating the unit, provide that the

1. Water spray nozzle

water tank lid is firmly closed

2. Water tank lid

• Close supervision is necessary when

3. Steam supply regulator/SELF CLEAN

children or infirm persons are near the

mode

unit.

4. Spray button

• Never leave the operating unit unattend-

5. Additional steam release button

ed.

6. Auto switching off indication

• Always unplug the unit if you do not use

7. Handle

it.

8. Power cord protection

• In order to avoid electric shock do not

9. Base

immerse the unit into water or other liq-

10. No water indication

uids.

11. Water tank with backlight

• Do not fill the water tank with scented liq-

12. Heating element on/off indication

uids, vinegar, starch solution, descaling

13. Temperature regulator

reagents, chemical agents etc.

14. Maximal water level indication

• Avoid contact with hot surfaces or out-

15. Iron sole

going steam of the iron in order to avoid

16. Front additional steam supply open-

getting burns.

ings

• Provide that the power cord is not hang-

17. Water bowl

ing over the edge of the ironing board and

make sure that it does not touch heated

SAFETY MEASURES

surfaces.

Before using the unit, please read the

• To unplug the unit always take it by the

instructions carefully and pay attention

plug, do not pull by the power cord.

to the illustrations.

• Before taking the unit away for keeping,

• Before switching on the unit, make sure

pour out the remaining water and let the

that your home electricity supply corre-

unit cool down.

sponds to the voltage of current speci-

• Pour out water only after you have un-

fied on the unit.

plugged the unit.

• Power cord is equipped with a euro plug;

• Do not use the unit if the plug or the pow-

insert it into the socket, with secure

er cord is damaged or if there are other

grounding.

damages in the unit.

• In order to avoid risk of fire do not use

• In order to avoid electric shock do not

adapters while connecting the appliance

repair the unit yourself. If there are some

to the outlet.

damages in the unit apply to the author-

• In order to avoid overloading of the pow-

ized service center.

er network do not switch on several ap-

pliances with high power consumption

BEFORE USAGE

simultaneously.

• Take out the iron from the package and

• Use the unit only for the intended pur-

remove the protective cartoon covering

poses.

from the iron sole (15).

• Use the iron only on the ironing board.

• Make sure that the electrical supply volt-

• Place the iron on a flat stable surface.

age corresponds to the iron's operating

voltage.

4

1252.indd 41252.indd 4 16.04.2008 14:51:3216.04.2008 14:51:32