Vitek VT-1227: STORAGE SPECIFICATIONS GUARANTEE CLEANING AND CARE

ENGLISH

• Fill the water tank with water as described

• Avoid touching the iron sole with sharp

in the corresponding section.

metal objects.

• Insert the power plug into the socket.

• Set the temperature control (9) to the

STORAGE

“MAX” position, the indicator (7) will light

• Turn the temperature control (9) anti-

up.

clockwise to the “MIN” position, set the

• Place the iron vertically.

constant steam supply button (12) to the

• When the sole temperature (12) reaches

upper position (steam supply is off).

the desired temperature value, the (7) in-

• Take the plug out of the socket.

dicator will go out, you can start ironing.

• Set the iron vertically and allow it to cool

• Switch on constant steam supply, by

down completely.

pressing the button (2) (steam supply

• Open the water tank lid (4), turn over the

is on); steam will be outgoing from the

iron and drain any remaining water from

openings of the iron sole (12).

the water tank (5).

• After usage set the temperature control

• Close the lid (4).

(9) to the “MIN” position, switch off con-

• Store the iron vertically in a cool dry place

stant steam supply by pressing the con-

out of reach of children.

stant steam supply button (2) (in the up-

per position of the button steam supply is

Delivery set

off).

1. Iron – 1 pc.

• Take the plug out of the socket and wait

2. Water tank – 1 pc.

until the iron cools down completely.

3. Traveling bag – 1 pc.

• Open the lid (4) and pour out water from

4. Instruction manual – 1 pc.

the tank.

• Press the button (11) and lower the han-

SPECIFICATIONS

dle (6) down.

Power supply: 120/240 V, ~ 50/60 Hz

Power consumption: 1000 W

ATTENTION!

If during the operation steam is not con-

Specifications subject to change without

stantly supplied, check whether the tem-

prior notice.

perature control (9) is set properly, check

the position of the button (2) and whether

Service life of appliance - 3 years

there is water in the water tank (5).

GUARANTEE

Details regarding guarantee conditions can

CLEANING AND CARE

be obtained from the dealer from whom

• Make sure that it is unplugged and has

the appliance was purchased. The bill of

cooled completely.

sale or receipt must be produced when

• Wipe the iron's outer surface with a damp

making any claim under the terms of this

cloth and then wipe dry.

guarantee.

• Sediment on the iron sole can be re-

moved with a cloth soaked in vinegar-

This product conforms to the EMC-

water solution.

Requirements as laid down by the

• After removing sediment, polish the sole

Council Directive 89/336/EEC

with a dry cloth.

and to the Law Voltage Regulation

• Do not use abrasive substances to clean

(73/23 EEC)

the sole and the body of the iron.

6

1227.indd 61227.indd 6 21.03.2011 12:51:3621.03.2011 12:51:36