Binatone NHB-7705: SPECIAL SAFETY MEASURES

SPECIAL SAFETY MEASURES

X Before turning the appliance on for the first

time, make sure that all components of the blender

have been properly installed.

X Do not apply too much force when installing the

blender attachment, as it may result in the break-

age of the appliance and in the termination of the

warranty.

X If a smell of burning, foreign sounds or power reduction occur

during the blending process, immediately unplug the appli-

ance from the outlet and clean the blender. If the blender still

ENGLISH

malfunctions after cleaning, contact an authorized service cen-

ter.

X It is recommended that original factory packaging should be

used for the transportation of the blender in order to prevent

its parts from breaking.

X If the ingredients are hot, allow them to cool before blending

(maximum temperature: 80

0

C). Never blend hot fat or oil with

the blender.

X Never use the blender to blend paints or solvents.

X Do not attempt to remove any ingredients when the blender is

in operation.

X Always turn the appliance off before removing the attach-

ment.

X The continuous operation of the blender should last for no

more than 1 minute and should be then interrupted for at least

1 minute.

X The blades of the blender are very sharp. Never touch the

blades of the blender.

X Turn the blender on only after it has been fully assembled.

Always check whether the appliance has been properly as-

sembled before each use.

PARTS OF THE APPLIANCE

Figure A:

1. Body of the appliance

2. Speed selector

3. Power on/off button

4. Blender attachment

5. Whisk attachment

6. Blender drive unit

7. Non-skid base/ storage lid

8. Blender blade unit

9. Blender bowl

10.Mixing cup

11.Power cable

12.Wall mount

5