Vitek VT-4023 BN: RESOLVING MALFUNCTIONS TECHNICAL CHARACTERISTICS PRECAUTIONARY MEASURES:

ENGLISH

Make sure that the device that you are connecting to the

Do not install the device on couches, beds or carpets

subwoofer is turned off. Set the subwoofer's volume level to

because the device's ventilation may be blocked.

the very minimum before turning it on.

9. The effects of heat  Do not install the device near heat

1. Connect the wires for the front left and right satellite

sources (for example, radiators, kitchen stoves, etc).

speakers, the center speaker, and the rear left and right

10. Periods of nonuse  if the device will not be used for a

satellite speakers to the output jacks on the rear panel of

long period of time, disconnect the power plug from the

the subwoofer, which are marked FR, FL, CEN, RP, RL

electrical outlet.

(see figure 2).

11. The need for maintenance  Utilize the services of quali

2. Connect an audio cable to the corresponding jacks on

fied technicians if:

the connecting device (for example, a DVD player); and

• The power cord is damaged; or

the opposite end of the cable to the corresponding audio

• The device body is damaged; or

input jacks on the rear panel of the subwoofer (see figure

• The device was subjected to rain; or

2).

• The device is not functioning properly; or

3. Connect the power cord to the electrical outlet and flip

• The device was subjected to shock.

the power switch, located on the rear panel of the sub

woofer, to the ON position. Turn on the input device con

12. Repair service  The consumer should not attempt to

nected to the subwoofer and use the volume control

repair the device himself. Use only the services of a qual

knob to set the desired volume levels on the subwoofers

ified technician.

channels.

13. Clean the device with a dry, soft clothe only.

14. Turn off the device during thunderstorms or when not in

RESOLVING MALFUNCTIONS

use for a long period of time.

1. No sound.

Make sure that all the connections are correct, and also

TECHNICAL CHARACTERISTICS

that all the audio cables are connected firmly.

Power supply: ~220230 Volts

2. Low frequency (bass) sound is missing.

Output power: 50 W (Subwoofer) + 5 x 20 W

Set the desired bass level.

(Satellite speakers)

3. Not all of the speakers work.

Subwoofer speaker: 6.5"/4 Om

Check all the connections between the speakers and the

Satellite speakers: 3"/8 Om

subwoofer or connect a different audio source.

Reproduction frequency band: 20 Hz  200 Hz (Subwoofer)

150 Hz  20 KHz

(Satellite speakers)

PRECAUTIONARY MEASURES:

The technical characteristics of the device may be changed

Attention: Please carefully read the points listed below to

without prior notice.

ensure safe use of the device.

Service life – no less than 5 years.

1. Read the instructions  The safety instructions and oper

ating rules should be read before using the device.

Guarantee

2. Save the instructions  Save the instructions for future

Details regarding guarantee conditions can be obtained from

use.

the dealer from whom the appliance was purchased. The bill

3. Follow the operating rules  All of the safety instructions

of sale or receipt must be produced when making any claim

should be followed.

under the terms of this guarantee.

4. Warning symbols  Heed the indications of all warning

symbols located on the device's panels or in these

This product conforms to the EMCRequirements as

instructions.

laid down by the Council Directive 89/336/EEC and

5. Power source  The device should only be connected to

to the Low Voltage Regulation (23/73 EEC)

a power source with the characteristics indicated on the

rear panel of the device or in these instructions.

6. Protecting the power cord  The power cord should be

laid out in such a way that it will not be damaged by

external items or its surroundings.

7. Water and moisture  Do not use the device near reser

voirs of water (for example, bath tubs, sinks, etc).

8. Ventilation  Install the device in a well ventilated room.

4