Milwaukee PCE 3: 12 13 ENGLISH ENGLISH

TECHNICAL DATA Chipping Hammer

PCE 3

MAINS CONNECTION

Rated input ..............................................................................

.........720 W

Connect only to single-phase a.c. current and only to the

Output ......................................................................................

.........360 W

system voltage indicated on the rating plate. It is also

-1

No-load speed .........................................................................

....0-3650 min

possible to connect to sockets without an earthing contact

Impact energy per stroke according to EPTA-Procedure 05/2009 .....

..........3,6 J

as the design conforms to safety class II.

Weight according EPTA-Procedure 01/2003 ...........................

..........3,7 kg

MAINTENANCE

Noise Information

Measured values determined according to EN 60745.

The ventilation slots of the machine must be kept clear at all

times.

Typically, the A-weighted noise levels of the tool are:

Important note! If the carbon brushes are worn, in addition

Sound pressure level (K = 3 dB(A)) .......................................

...........87 dB (A)

to exchanging the brushes the tool should be sent to

Sound power level (K = 3 dB(A)) ............................................

...........98 dB (A)

after-sales service. This will ensure long service life and top

Wear ear protectors!

performance.

Vibration Information

Use only Milwaukee accessories and spare parts. Should

Total vibration values (vector sum in the three axes)

components need to be replaced which have not been

determined according to EN 60745.

described, please contact one of our Milwaukee service

Vibration emission value a

:

h

2

agents (see our list of guarantee/service addresses).

Chiselling: ...............................................................................

........ 11,5 m/s

2

Uncertainty K = .......................................................................

..........2,6 m/s

If needed, an exploded view of the tool can be ordered.

Please state the Article No. as well as the machine type

printed on the label and order the drawing at your local

WARNING

service agents or directly at: Milwaukee Electric Tool,

Max-Eyth-Straße 10, D-71364 Winnenden, Germany.

The vibration emission level given in this information sheet has been measured in accordance with a standardised test given

in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.

SYMBOLS

The declared vibration emission level represents the main applications of the tool. However if the tool is used for different

applications, with different accessories or poorly maintained, the vibration emission may differ. This may signicantly increase

the exposure level over the total working period.

Please read the instructions carefully before

starting the machine.

An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or

when it is running but not actually doing the job. This may signicantly reduce the exposure level over the total working period.

Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the

accessories, keep the hands warm, organisation of work patterns.

Always disconnect the plug from the socket

before carrying out any work on the

Under the effect of extreme electromagnetic interferences

machine.

WARNING! Read all safety warnings and all

from the outside, temporary variations in the speed of

instructions, including those given in the accompanying

rotation could arise in particular cases.

brochure. Failure to follow the warnings and instructions

may result in electric shock, re and/or serious injury.

SPECIFIED CONDITIONS OF USE

Save all warnings and instructions for future reference.

The hammer can be used for chiselling in stone and

Accessory - Not included in standard

SAFETY INSTRUCTIONS

concrete.

equipment, available as an accessory.

Wear ear protectors. Exposure to noise can cause hearing

Do not use this product in any other way as stated for

loss.

normal use.

Use auxiliary handles supplied with the tool. Loss of

EC-DECLARATION OF CONFORMITY

control can cause personal injury.

Do not dispose of electric tools together

We declare under our sole responsibility that this product is

Hold power tool by insulated gripping surfaces, when

with household waste material! In

in conformity with the following standards or standardized

performing an operation where the cutting accessory

observance of European Directive 2002/96/

documents.

may contact hidden wiring or its own cord. Cutting

EC on waste electrical and electronic

EN 60745-1:2009 + A11:2010

accessory contacting a „live“ wire may make exposed metal

equipment and its implementation in

EN 60745-2-6:2010

parts of the power tool „live“ and could give the operator an

accordance with national law, electric tools

EN 55014-1:2006 + A1:2009 + A2:2011

electric shock.

that have reached the end of their life must

EN 55014-2:1997 + A1:2001 + A2:2008

Appliances used at many different locations including open

be collected separately and returned to an

EN 61000-3-2:2006 + A1:2009 + A2:2009

air must be connected via a current surge preventing switch.

environmentally compatible recycling

EN 61000-3-3:2008

facility.

Always wear goggles when using the machine. It is

in accordance with the regulations

recommended to wear gloves, sturdy non slipping shoes

2011/65/EU (RoHs)

and apron.

2006/42/EC

Class II construction, tool in which

2004/108/EC

Sawdust and splinters must not be removed while the

protection against electric shock does not

machine is running.

rely on basic insulation only, but in which

additional safety precautions, such as

Always disconnect the plug from the socket before carrying

double insulation or reinforced insulation,

out any work on the machine.

are provided.

Winnenden, 2012-09-11

Only plug-in when machine is switched off.

Keep mains lead clear from working range of the machine.

Always lead the cable away behind you.

When working in walls ceiling, or oor, take care to avoid

Rainer Kumpf

electric cables and gas or waterpipes.

Director Product Development

The dust produced when using this tool may be harmful to

Authorized to compile the technical le

health. Do not inhale the dust. Wear a suitable dust

protection mask.

12 13

ENGLISH

ENGLISH