Phottix Odin for Canon: Adjusting  ash zoom Using the Clear Button

Adjusting  ash zoom

Using the Clear Button

The Phottix Odin allows the zoom level of  ashes to be

1. The Clear Button will erase any setting currently in the

set wirelessly. Zoom can be set as TTL or Manual. When

TCU.

TTL is selected: The  ash zoom setting will change

2. Press the Clear button to remove TT/M/O , Ratio,

dynamically as a camera zoom ring is adjusted. In

Zoom and EV settings currently in the TCU.

Manual mode, the  ash zoom can be changed to the

3. The transmission channel set on the TCU will not be

desired zoom setting.

reset and stay on the channel selected by the user

after the Clear Button is pressed.

Using Zoom

1. Press the Zoom Button to enter the Zoom screen

Using the Test Button

2. Pressing the Selection button will cycle through

The test button will  re all  ashes connected to Phottix

groups A, B and C, and Transmission channel.

Odin receivers that are on the same channel as the TCU.

3. Note: Pressing the Selection button after the CH

1. Press the Test button.

selection will return to the TTL/Mixed or Ratios

2. Flashes will  re in sequence: Group A, followed by

Function Screens.

Groups B and C.

4. With groups A, B or C active: Press the Mode Button

to change from TTL to Manual mode. In Manual

Using High Speed Sync (HSS) and

Zoom, press the - / + buttons to adjust the  ash

Second Curtain Sync (SCS)

zoom. No adjustments can be made in TTL mode.

Pressing the HSS/SCS button will cycle between HSS,

SCS and standard operations.

1. HSS will allow shutter speeds longer than a

7