Melissa 640-089: ASSEMBLING THE VACUUM CLEANER USING THE CLEANING ACCESSORIES REPLACING THE DUSTBAG FLOOR BRUSH USE REPLACING THE HEPA FILTER REMOVING THE ACCESORIES REPLACING THE MOTORFILTER INSTRUCTIONS FOR USE

SMC85_IM 22/12/04 14:21 Side 15

ASSEMBLING THE VACUUM

- Press the ON/OFF button to switch on

the appliance.

CLEANER

Always remove the plug from the power

USING THE CLEANING

socket before fitting or removing

ACCESSORIES

accessories.

1. The dusting brush

for furniture, venetian blinds, books,

Adjustment of the telescopic tube:

lamp shades and shelves.

You can adjust the lenght of the telescopic

tube by holding the black ring and pulling or

2. The crevice tool

for radiators, crevices, corners,

pushing the part with the locking mecanism.

baseboards and between cushions.

It can be unlocked just as easily and

brought into a different position.

3. The upholstery brush

for cushions and drapes.

Fitting the tube:

REPLACING THE DUSTBAG

Insert the tube into the air intake on the top

- After removing the tube, open the front

of the appliance. Insert the tube and press

cover by pressing the button and

until it clicks into position

pulling upwards.

- Remove the dustbag.

Removing the tube:

- Replace the dustbag as described

Remove the plug from the power socket.

below:

To release the tube, press the button on the

- Insert a new filterbag by leading the

end of the tube and pull the tube firmly

cardboard on the filterbag into the

from the air intake duct.

drills of the filterholder.

- Close the front cover by pressing it

FLOOR BRUSH USE

down until it clicks.

- Press the button on the floor brush to

the position with brushes for cleaning

REPLACING THE HEPA FILTER

hard floors.

The HEPA filter is the filter placed on the

- Press the button on the floor brush to

back of the vacuum cleaner:

the position without brushes for

Press the release-button on the grid and

cleaning carpets.

pull it out at the same time.

Remove the HEPA filter and insert a new

REMOVING THE ACCESORIES

HEPA filter.Insert the grid back in place.

- To remove the accessories, pull the

accessory firmly off the tube.

REPLACING THE MOTORFILTER

The motorfilter is the filter placed behind

INSTRUCTIONS FOR USE

the dustbag:

- Before using the appliance unwind a

Open the front cover and gently pull the

sufficient length of cable and insert the

filter free of the holders. Insert a new

plug into the power socket. A YELLOW

mark on the power cable shows the

motorfilter.

ideal cable length. Do not extend the

cable beyond the RED mark. To rewind

the power cable, press the rewind

button with one hand, and guide the

cable with the other hand to ensure

that it does not whip causing damage.

15