Melissa 640-071: REPLACING THE DUSTBAG: REPLACING THE MOTORFILTER REPLACING THE HEPA FILTER REMOVING THE HOSE: EXTRA FEATURES FLOOR BRUSH USE INSTRUCTIONS FOR USE

JCV-2007_IM_071 10/12/04 14:12 Side 15

- Do not use the appliance on wet

cable beyond the red mark.

surfaces.

-To rewind the power cable, press the

- Do not obstruct the air intake or the air

rewind button with one hand, and guide

outlet vents.

the cable with the other hand to ensure

- Do not use the appliance to vacuum

that it does not whip causing damage.

needles, drawing pins or string.

- Press the ON/OFF button to switch the

Telescopic tube

appliance on.

You can adjust the length of the telescopic

REPLACING THE DUSTBAG:

tube by pushing the locking mechanism

down and pulling in the bottom section of

After removing the tube, open the front

the tube to a suitable length. When parking,

cover by pressing the lock lever and pulling

shorten the tube as far as possible.

upwards.

Remove the dustbag-holder by pulling the

Suction control

handle of the holder.

While in use, the suction force can be

Remove the dustbag from the holder.

regulated by opening and closing the air

Replace the filter by inserting the carton of

valve (3) on the handle. It can also be

the filter into the grooves of the filter-holder.

adjusted electronically using the suction

REPLACING THE MOTORFILTER

force regulation button (13).

- The motorfilter is the filter placed behind

ASSEMBLING THE VACUUM CLEANER:

the dustbag:

Always remove the plug from the power

- Open the front cover, and gently pull out

socket before fitting or removing

the filter free of the holders.

accessories.

- Insert a new motorfilter.

Fitting the tube:

- Press the buttons on the end of the

REPLACING THE HEPA FILTER

tube and insert the tube into the air-

The HEPA filter is the filter placed on the

intake.

back of the vacuum cleaner:

Press the release-button on the grid and

REMOVING THE HOSE:

pull it out at the same time.

Remove the plug from the power socket. To

Remove the HEPA filter and insert a new

release the hose, press the buttons on the

HEPA filter.Insert the grid back in place.

end of the hose and pull the hose firmly from

the air intake duct.

EXTRA FEATURES

The cleaner has two wheels at the rear and

FLOOR BRUSH USE

a multi-directional swivel wheel at the front

- Press the button on the floor brush to

so that it can be moved easily. It also has a

the back position so the brush is shown

convenient carrying handle.

for cleaning hard floors

Before storing your cleaner rewind the

-Press the button on the floor brush to

supply cord. The cleaner may be stored

the back position for cleaning carpets.

standing on its end, to save space.

The vacuum cleaner is fit with a carrying

INSTRUCTIONS FOR USE

strap, which makes it possible to carry the

- Before using the appliance, unwind a

vacuum cleaner around while vacuum

sufficient length of cable and insert the

cleaning.

plug into the power socket. A yellow

mark on the power cable shows the

ideal cable length. Do not extend the

15