Melissa 245-048: INTRODUCTION KEY SAFETY MEASURES PRIOR TO FIRST USE USING THE KETTLE

UK

INTRODUCTION

KEY

To get the best out of your new kettle, please read

1

9

2

3

through these instructions carefully before using

it for the first time. Pay particular attention to the

safety measures. We also recommend that you

keep the instructions for future reference, so that

you can remind yourself of the functions of the

kettle.

5

SAFETY MEASURES

Normal use of the kettle

• Incorrect use of the kettle may cause

personal injury and damage to the kettle.

• Use the kettle for its intended purpose only.

The manufacturer is not responsible for

any damage resulting from incorrect use or

handling (see also Guarantee Terms).

8

4

76

• The kettle may only be connected to 230 V,

50 Hz.

• The kettle should not be switched on unless

there is water in it.

• The kettle or cord must not be placed in

water or any other liquid.

• Never leave the kettle unattended when in

use and keep an eye on children.

• The water level in the kettle must not exceed

the maximum filling level (MAX 1.7L) marked

on the water level gauges.

1. Pouring spout

• This kettle is not suitable for commercial or

2. Lid

outdoor use.

3. Water level gauge

4. Indicator light

Positioning the kettle

5. On/off button

• Always place the kettle at the back of a

kitchen counter and at a safe distance

6. Switch

from flammable objects such as curtains,

7. Base

tablecloths or similar.

8. Removable limescale filter

• Always place the kettle so that the spout is

9. Lock for opening of lid

turned away from any other surfaces as the

steam from boiling water may damage them.

PRIOR TO FIRST USE

• Do not cover the kettle.

Before using the kettle for the first time (or

• Do not allow the cord to hang over the edge

following a long period without use), the kettle

of the counter, and keep it away from hot

should be boiled 3 times.

objects and naked flames.

1. Read the safety instructions through

carefully.

• Return the kettle to its base after use.

2. Ensure that the cord is fully extended.

Cord, plug and mains socket

3. Fill the kettle with water until the water level

• Check regularly that the cord is not damaged

reaches the maximum filling level of 1.7 litres.

and do not use the kettle if it is, or if it has

4. Switch on the kettle by pointing the on/off

been dropped or damaged in any other way.

button (5) upwards “I”.

• If the kettle, cord or plug is damaged, it must

5. Pour out the water once it has boiled.

be inspected and, if necessary, repaired by

6. Repeat the process described under points

an authorised repair engineer, otherwise

3-5 three times.

there is a risk of electric shock. Never try to

USING THE KETTLE

repair the appliance yourself.

• Remove the plug from the socket for

1. Pour fresh water into the kettle. The kettle

cleaning.

must contain at least 0.5 l and no more than

1.7 l.

• Avoid pulling the cord when removing the

plug from the socket. Instead, hold the plug.

2. Place the kettle on its base (7), which should

be placed on a fixed, flat surface.

• Check that it is not possible to pull or trip

over the kettle or any extension cord.

3. Switch the kettle on with the on/off button

(5) so that the button is pointing upwards

towards the letter "I".

10