Candy GOY 1050 D: Selecting the wash program

Putting detergent in machine

D) Open the drawer, choose the detergent and put in the

correct amount, according to the manufacturer’s instructions

and the advice on page "Detergents, washing aids and

amounts to use".

E) Add any other laundry aids.

F) Close the drawer again.

Liquid detergents that are to be placed directly into the drum

should use the recommended dispensing device.

Selecting the wash program

Refer to the program guide to select the most suitable prog

ram.

The pro

gram is selected by turning the program selector

clockwise and aligning the program number with the indic

ator.

Check that the tap is turned on and that the discharge hose is

positioned correctly.

Adjust the wash temp

erature if necessary.

Press additional function buttons if you requ

ire.

Press the start button, the program will begin.

When the START button is pressed the machine s

ets the work-

ing sequence in motion.

The program carries out with the program selector stationary on the selected program till

cycle ends.

WARNING!

If there is any break in the power supply while the machine is operating, a special

memory stores the selected program and, when the power is restored, it contin-

ues where it left off.

When the program has finished

– The display will read “END”.

– Wait for the door lock to be released (about 2 minutes after the program has finished).

– Switch off the machine by turning the program selector to the “OFF” position.

– Open the door and remove the laundry.

Disconnect the plug from the mains power supply and turn off the water supply after every

use.

For all types of wash consult the program table and follow the operations in the or-

der indicated.

62