Candy GOY 1050 D: Installation

Installation : Candy GOY 1050 D

Installation

After removing the machine from the packaging, proceed as

follows:

On the back of the machine:

45

1) Fix the sheet of corrugated material on the bottom as it is

shown on picture. You can find the fastener means in the

instruction booklet pack.

N.B! If the appliance is installed on a carpeted floor en-

sure that the ventilation holes on the sheet are not ob-

structed.

2) Remove the 4 fixing screws marked (A)

and remove the 4 spacers marked (B)

3) Cover the 4 holes using the caps pro-

vided in the instruction booklet pack.

Note: we recommend you keep the spacers and screws to immobilize the ma-

chine for future transit. The Manufacturers will not be responsible for any possi-

ble damage to the machine caused by not following the rules relating to releasing

the mechanism. The user is responsible for all costs of installation.

WARNING!

Do not leave the packaging in the reach of children as it is a potential source of danger.

4) Carefully cut the securing strap that holds the main cord

and the drain hose.

5) Use the 4 feet to level the machine with the floor:

a) Turn the nut clockwise to release the screw adjuster of

the foot.

b) Rotate foot to raise or lower it until it stands firmly on t

he

ground.

c) Lock the foot in position by turning the nut anti-

clockwise until it comes up against the bottom of the ma-

chine.

46