Candy GOY 1050 D: Quick Start

Quick Start

Washing

– Press the button inside the door handle to open the door.

– Select laundry and put it in the machine.

– Close the door.

– Put detergent in the dispenser compartments, compartment 1 for pre wash and com-

partment 2 for all other programs.

– Select program by turning the program knob (Your desired program may be seen on the

display).

– Adjust the wash temperature if necessary.

– Select any function buttons required and then press the Start/Pause button (

).

– There may be a short time delay from pressing the start/pause bottom to the start of the

program, while the machine senses the water required and sets the parameters for the

program.

When the program has finished

– The display will read “END”.

– Wait 2 minutes.

– Switch off the machine by turning the control knob to the off position.

– Open the door and remove the laundry.

Disconnect the plug from the mains power supply and turn off the water supply after every

use.

Useful advice for users

Tips on using your domestic appliance in the most environmentally-friendly and economi-

cal way.

Do a full load in your washing machine.

To prevent any possible waste of energy, water or detergent we recommend that

you put a full load in your washing machine, not exceed the maximum load size.

Save up to 50% energy by washing a full load instead of 2 half loads.

When is prewashing really needed?

Only with particularly dirty loads! Energy savings of 5 to 15% are made by not selecting the

prewash option for normally soiled laundry.

Which wash temperature should you choose?

Using stain removers before machine washing reduces the need to wash at temperatures

over 60°C. Energy savings of up to 50% can be made by using a 60°C wash temperature.

44