Candy GOY 1050 D: Water supply

Water supply

The machine has an inlet hose with ¾" threaded ferrules

fitted to the ends to attach between the threaded connec-

tor on the appliance and the cold water supply.

The appliance must be connected to the water mains

using new hose-sets. The old hose-sets should not be

reused.

The appliance must only be connected to the cold water

supply.

Connection to a warm water supply, that is over 40°, may

damage certain delicate fabrics.

Note: it is advisable to turn off the tap after each

wash to isolate the washing machine from the water

supply.

If the inlet hose’s connection point is changed, check that

the ¾" threaded ferrule on the inlet hose is firmly atta

ched

to the electrovalve connector.

For the washing machine to function properly the terminal end of the discharge

hose (mouth) must be at a minimum of 50 cm and a maximum of 85 cm from the

ground.

47