Melissa 640-040/051: REPLACING THE DUSTBAG: ASSEMBLING THE VACUUM CLEANER: REPLACING THE MOTORFILTER REMOVING THE HOSE: REPLACING THE MICROFILTER FLOOR BRUSH USE INSTRUCTIONS FOR USE EXTRA FEATURES MAINTENANCE

640051_IM 28/07/05 10:56 Side 15

- Do not use the appliance on wet

REPLACING THE DUSTBAG:

surfaces.

- Remove the hose.

- Do not obstruct the air intake or the air

- Lift the front cover and move the lock

outlet vents.

that holds the dust bag forward. Now

- Do not use the appliance to vacuum

the dust bag can be removed.

needles, drawing pins or string.

- Place a new dustbag and move the lock

back over the dustbag so it sits firm in

ASSEMBLING THE VACUUM CLEANER:

its place.

Always remove the plug from the power

socket before fitting or removing

REPLACING THE MOTORFILTER

accessories.

the motorfilter is the filter placed behind the

Fitting the tube:

dustbag.

- Press the buttons on the end of the

-Take the filter holder out and remove the

tube and insert the tube into the air-

filter.

intake.

-Clean the filterholder before a new filter

is placed in it.

REMOVING THE HOSE:

- Push the filter holder with the new filter

Remove the plug from the power socket. To

back in place.

release the hose, press the buttons on the

end of the hose and pull the hose firmly from

REPLACING THE MICROFILTER

the air intake duct.

The microfilter is the filter placed on the

back of the vacuum cleaner:

FLOOR BRUSH USE

Press the release-button on the grid and

- Press the left button on the floor brush

pull it out at the same time.

down for cleaning hard floors.

Remove the microfilter and insert a new

- Press the rigth button on the floor brush

microfilter.

down for cleaning carpets.

Insert the grid back in place.

INSTRUCTIONS FOR USE

EXTRA FEATURES

- Before using the appliance, unwind a

The cleaner has two wheels at the rear and

sufficient length of cable and insert the

a multi-directional swivel wheel at the front

plug into the power socket. A yellow

so that it can be moved easily. It also has a

mark on the power cable shows the

convenient carrying handle.

ideal cable length. Do not extend the

Before storing your cleaner rewind the

cable beyond the red mark.

supply cord. The cleaner may be stored

-To rewind the power cable, press the

standing on its end, to save space.

rewind button with one hand, and guide

The vacuum cleaner is fit with a carrying

the cable with the other hand to ensure

strap, which makes it possible to carry the

that it does not whip causing damage.

vacuum cleaner around while vacuum

- Press the ON/OFF button to switch the

cleaning.

appliance on.

MAINTENANCE

Pull out the plug and if necessary clean the

appliance on the outside with a damp cloth.

Never immerse the appliance into water and

other liquids!

15