Melissa 638-135: Applications MAINTENANCE

IM 26/05/05 16:08 Side 20

used to style your beard during trimming.

Applications

The set also includes a cleaning brush

The nose/ear hair trimmer with rotating

and lubricating oil for maintenance

blades is used to remove unwanted hair

purposes. All components fit into the

growth in the nose and ears.

practical holder (6).

• Remove the protective cap (a), and fit

The beard/sideburn trimmer is used to

the required cutting head on the

trim your beard and sideburns.

trimmer unit.

•Turn the cutting head slightly in a

The beard thinning trimmer is used to thin

clockwise direction when putting it on

out and shape your beard and

and slightly anti-clockwise when taking

moustache.

it off. Three of the four cutting heads

have a silver stripe, which must line up

The minishaver is used to trim short hair

with the silver stripe on the trimmer

at the edges of the beard and moustache,

unit to ensure the cutting head is

but is not suitable for actual shaving.

correctly in place.

• Fit the guide combs onto one of the

The guide combs can be fitted onto the

two cutting heads mentioned above by

beard/sideburn trimmer or the beard

inserting the front edge of the cutting

thinning trimmer. They provide a beard

head behind the two pins at the front

length of between 2 and 16 mm,

end of the guide comb and then

depending on the guide comb and setting

pressing down on the back end of the

selected.

guide comb until it clicks into place.

MAINTENANCE

Set the required beard length using the

Lubricate the beard thinning trimmer and

slide control at the top of the guide

beard/sideburn trimmer with the

comb. Remove the guide comb by

accompanying oil approximately once a

lifting up its back end and pulling it off.

month or as required. Apply 1-2 drops to

• Push the on/off button upwards to

the cutting head, let the trimmer unit run

switch the trimmer unit on and

for approximately 10 seconds, and wipe

downwards to switch it off.

away any excess oil.

20