Melissa 640-050: REPLACING THE DUSTBAG: REPLACING THE MOTORFILTER ASSEMBLING THE VACUUM CLEANER: REPLACING THE MICROFILTER REMOVING THE HOSE: FLOOR BRUSH USE EXTRA FEATURES INSTRUCTIONS FOR USE MAINTENANCE

JCV-2007_tele_IM6 14/09/04 10:36 Side 15

- Do not use the appliance on wet

- Press the ON/OFF button to switch the

surfaces.

appliance on.

- Do not obstruct the air intake or the air

REPLACING THE DUSTBAG:

outlet vents.

- Do not use the appliance to vacuum

After removing the tube, open the front

needles, drawing pins or string.

cover by pressing the lock lever and pulling

upwards.

Telescopic tube

Remove the dustbag-holder by pulling the

You can adjust the length of the telescopic

handle of the holder.

tube by pushing the locking mechanism

Remove the dustbag from the holder.

down and pulling in the bottom section of

Replace the filter by inserting the carton of

the tube to a suitable length. When parking,

the filter into the grooves of the filter-holder.

shorten the tube as far as possible.

REPLACING THE MOTORFILTER

ASSEMBLING THE VACUUM CLEANER:

- The motorfilter is the filter placed behind

Always remove the plug from the power

the dustbag:

socket before fitting or removing

accessories.

- Open the front cover, and gently pull out

Fitting the tube:

the filter free of the holders.

- Press the buttons on the end of the

- Insert a new motorfilter.

tube and insert the tube into the air-

intake.

REPLACING THE MICROFILTER

The microfilter is the filter placed on the

REMOVING THE HOSE:

back of the vacuum cleaner:

Remove the plug from the power socket. To

Press the release-button on the grid and

release the hose, press the buttons on the

pull it out at the same time.

end of the hose and pull the hose firmly from

Remove the microfilter and insert a new

the air intake duct.

microfilter.

Insert the grid back in place.

FLOOR BRUSH USE

EXTRA FEATURES

- Press the button on the floor brush to

the back position so the brush is shown

The cleaner has two wheels at the rear and

for cleaning hard floors

a multi-directional swivel wheel at the front

-Press the button on the floor brush to

so that it can be moved easily. It also has a

the back position for cleaning carpets.

convenient carrying handle.

Before storing your cleaner rewind the

INSTRUCTIONS FOR USE

supply cord. The cleaner may be stored

standing on its end, to save space.

- Before using the appliance, unwind a

The vacuum cleaner is fit with a carrying

sufficient length of cable and insert the

strap, which makes it possible to carry the

plug into the power socket. A yellow

vacuum cleaner around while vacuum

mark on the power cable shows the

cleaning.

ideal cable length. Do not extend the

cable beyond the red mark.

MAINTENANCE

-To rewind the power cable, press the

Pull out the plug and if necessary clean the

rewind button with one hand, and guide

appliance on the outside with a damp cloth.

the cable with the other hand to ensure

Never immerse the appliance into water and

that it does not whip causing damage.

other liquids!

15