Melissa 640-049: REPLACING THE DUSTBAG: ASSEMBLING THE VACUUM CLEANER: REPLACING THE MOTORFILTER REMOVING THE HOSE: REPLACING THE HEPA FILTER FLOOR BRUSH USE EXTRA FEATURES INSTRUCTIONS FOR USE MAINTENANCE

JCV-2007_HEPA_IM 22/08/05 15:48 Side 15

surfaces.

REPLACING THE DUSTBAG:

- Do not obstruct the air intake or the air

After removing the tube, open the front

outlet vents.

cover by pressing the lock lever and pulling

- Do not use the appliance to vacuum

upwards.

needles, drawing pins or string.

Remove the dustbag-holder by pulling the

handle of the holder.

ASSEMBLING THE VACUUM CLEANER:

Remove the dustbag from the holder.

Always remove the plug from the power

Replace the filter by inserting the carton of

socket before fitting or removing

the filter into the grooves of the filter-holder.

accessories.

REPLACING THE MOTORFILTER

Fitting the tube:

- Press the buttons on the end of the

- The motorfilter is the filter placed behind

tube and insert the tube into the air-

the dustbag:

intake.

- Open the front cover, and gently pull out

the filter free of the holders.

REMOVING THE HOSE:

- Insert a new motorfilter.

Remove the plug from the power socket. To

release the hose, press the buttons on the

REPLACING THE HEPA FILTER

end of the hose and pull the hose firmly from

The HEPA filter is the filter placed on the

the air intake duct.

back of the vacuum cleaner:

Press the release-button on the grid and

FLOOR BRUSH USE

pull it out at the same time.

- Press the button on the floor brush to

Remove the HEPA filter and insert a new

the back position so the brush is shown

HEPA filter.Insert the grid back in place.

for cleaning hard floors

EXTRA FEATURES

-Press the button on the floor brush to

the back position for cleaning carpets.

The cleaner has two wheels at the rear and

a multi-directional swivel wheel at the front

INSTRUCTIONS FOR USE

so that it can be moved easily. It also has a

- Before using the appliance, unwind a

convenient carrying handle.

sufficient length of cable and insert the

Before storing your cleaner rewind the

plug into the power socket. A yellow

supply cord. The cleaner may be stored

mark on the power cable shows the

standing on its end, to save space.

ideal cable length. Do not extend the

The vacuum cleaner is fit with a carrying

cable beyond the red mark.

strap, which makes it possible to carry the

vacuum cleaner around while vacuum

-To rewind the power cable, press the

cleaning.

rewind button with one hand, and guide

the cable with the other hand to ensure

MAINTENANCE

that it does not whip causing damage.

Pull out the plug and if necessary clean the

- Press the ON/OFF button to switch the

appliance on the outside with a damp cloth.

appliance on.

Never immerse the appliance into water and

other liquids!

15