Melissa 640-045: OPERATION REPLACING THE DUSTBAG: REPLACING THE MOTORFILTER ASSEMBLING THE VACUUM CLEANER: REPLACING THE EXHAUST- MICROFILTER FLOOR BRUSH USE INSTRUCTIONS FOR USE EXTRA FEATURES

JCV-3001_640045_IM 10/10/05 9:39 Side 15

OPERATION

- Press the ON/OFF button to switch the

appliance on.

- Do not remove the plug from the socket

by pulling the cable or the appliance

REPLACING THE DUSTBAG:

itself.

After removing the hose, open the front

- Do not run the appliance over the

cover by pressing the lock lever and pulling

power cable.

upwards.

- Do not use the appliance to vacuum up

Remove the dustbag-holder.

lit matches, cigarette ends or hot ashes.

Remove the dustbag from the holder.

- Do not use the appliance on wet

Replace the dustbag by inserting the carton

surfaces.

of the dustbag into the grooves of the

- Do not obstruct the air intake or the air

dustbag-holder.

outlet vents.

- Do not use the appliance to vacuum up

REPLACING THE MOTORFILTER

needles, drawing pins or string.

The motor-filter is the filter placed behind

the dustbag:

ASSEMBLING THE VACUUM CLEANER:

Open the front cover, and gently pull out the

Fitting the tube:

filter free of the holder.

- Press the buttons on the end of the

Insert a new motor-filter.

tube and insert the tube into the air-

intake.

REPLACING THE EXHAUST-

MICROFILTER

Removing the hose:

The exhaust-filter is the filter placed on the

back of the vacuum cleaner:

- To release the hose, press the buttons

Press the release-button on the exhaust

on the end of the hose and pull the

grating and pull it out at the same time.

hose firmly from the air intake duct.

Remove the exhaust-filter and insert a new

FLOOR BRUSH USE

exhaust-filter.

Insert the exhaust grating back in place.

- Press the button on the floor brush, so

the brush is shown for cleaning hard

A cutting-filter is supplied together with the

floors

original dustbags. This filter can be cut to fit

- Press the other button to withdraw the

both the motor and the exhaust filter. Please

brush for cleaning carpets.

use the existing filter as a template

INSTRUCTIONS FOR USE

EXTRA FEATURES

- Before using the appliance, unwind a

The cleaner has two wheels at the rear and

sufficient length of cable and insert the

a multi-directional swivel wheel at the front

plug into the power socket. A yellow

so that it can be moved easily. It also has a

mark on the power cable shows the

convenient carrying handle.

ideal cable length. Do not extend the

Before storing your cleaner rewind the

cable beyond the red mark.

supply cord. The cleaner may be stored

To rewind the power cable, press the

standing on its end to save space.

rewind button with one hand, and guide

the cable with the other hand to ensure

that it does not whip causing damage.

15