Melissa 635-090: SAFETY INSTRUCTIONS: USE

SAFETY INSTRUCTIONS: USE: Melissa 635-090

2

2

UK

SAFETY INSTRUCTIONS:

Read all instructions before using.

Plug in your appliance using the proper voltage as indicated on

your unit.

Always unplug the appliance immediately after use.

Do not use while bathing.

Keep away from water or humid areas (such as sink filled with

water).

Do not place in or drop into water or other liquid.

If the appliance falls into water, unplug it immediately. Do not

reach into the water.

Do not leave the appliance unattended while it is operating or

plugged in.

Close supervision is necessary when this appliance is used by

or near children.

Use this appliance only for its intended use as described in

this manual. Do not use attachments not recommended by the

manufacturer.

Never operate this appliance when it has a damaged cord

or plug, if it is not working properly, if it has been dropped or

damaged in any manner or dropped into water. Take appliance

to the store, where you bought it for examination and repair or

mechanical adjustment.

Keep the cord away from hot or heated surfaces. Do not wrap

the cord around the appliance.

Do not use outdoors.

Do not place appliance on any surface while it is operating or

while switch is turned on.

Do not use an extension cord with this appliance.

This appliance adopts the most advanced technology and uses

PTC (Positive Temperature Coefficient) as calorific element. This

gives a stabile temperature without influence of the outer condi-

tions. The ceramic coating provides a better distribution of heat,

creating a smoother, flawless finish to he hair and longer lasting

results. The ceramic surface locks in the hair’s natural oils which

retains colour for longer and reduces static build-up.

USE

The hair should be clean and dry.

Place the curling tongs on an even, heatresistant surface and

connect the power supply on the on/off button. The indicator

lamp is activated and flashes on and off until the selected tempe

-

rature has been reached.

The heat can be adjusted in an interval between 80 and 160 de-

grees Celsius by using the control knob by the on/off button.

This is indicated by figures from 1 to 25, where one is the lowest

possible heat and 25 is max. heat, 160 degrees C.

It takes about 5 minutes before the plates have reached the

selected temperature.