Melissa 246-021: Timer REPLACING THE BATTERIES CLEANING INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT GUARANTEE TERMS IMPORTER
Timer REPLACING THE BATTERIES CLEANING INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT GUARANTEE TERMS IMPORTER: Melissa 246-021
Table of contents
- INTRODUCTION SAFETY MEASURES KEY TO THE KITCHEN SCALE’S PARTS WALL MOUNTING OF THE KITCHEN SCALE PREPARING THE KITCHEN SCALE Setting the clock USE Weighing Weighing with the tare function Conversion between grams and ounces.
- Timer REPLACING THE BATTERIES CLEANING INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT GUARANTEE TERMS IMPORTER
11
Timer
When the timer is set, it can run in the background
while the scale is in use.
1. Briefl y press the button ”MODE”; press once if the
display shows the time, and twice if the display
shows weight. The timer function will be activated,
and the display shows “00.00” and “TMR”.
2. Press down the button ”MODE”, until the two zeros
at the right are fl ashing. Set the desired amount of
seconds by pressing the button ”UNIT”.
3. Press button ”MODE” once again. The two zeros on
the left will start fl ashing. Set the desired amount of
minutes by pressing the button ”UNIT”.
4. Press the ”MODE” key again, to complete the
setting. The countdown starts automatically.
5. When the timer reaches ”00:00”, an alarm will
sound. You can turn off the alarm by pressing a
random key.
6. If you want to stop the countdown before time,
press the button “UNIT”. The countdown will stop.
The countdown will resume, when you press “UNIT”
again.
7. Press the button “MODE” to return to the displaying
of the time.
Tips!
If you press the keys of the kitchen scale or push
the weighing platform down without having tilted the
lower part down, the display might show the message
“UnSF”, or another message to indicate that it is not
safe to use the kitchen scale in this way. Always tilt
down the lower part, before the kitchen scale is used.
Tilt the lower part up along the top, when the scale is
not in use.
REPLACING THE BATTERIES
The battery should be replaced when the display shows
the message “Lo”. Dismount the battery cover on the
back of the scale, and pull the battery out of the holders
in the battery enclosure. Put in the new battery. Make
sure that the polarity is correct; the positive pole of
the battery (+) has to point in your direction. Close the
cover.
CLEANING
• Clean the scale using a damp cloth and, if
necessary, a little washing-up liquid.
• Do not use scouring powder, steel wool or strong
detergents to clean the scale, as this may scratch it.
INFORMATION ON DISPOSAL AND RECYCLING OF
THIS PRODUCT
Please note that this Adexi product is marked with this
symbol:
This means that this product must not be disposed of
together with ordinary household waste, as electrical
and electronic waste must be disposed of separately.
In accordance with the WEEE directive, every member
state must ensure correct collection, recovery, handling
and recycling of electrical and electronic waste. Private
households in the EU can take used equipment to
special recycling stations free of charge. In some
member states you can, in certain cases, return
the used equipment to the retailer from whom you
purchased it, if you are purchasing new equipment.
Contact your retailer, distributor or the municipal
authorities for further information on what you should
do with electrical and electronic waste.
GUARANTEE TERMS
The guarantee does not apply:
• if the above instructions are not followed
• if the appliance has been interfered with
• if the appliance has been mishandled, subjected to
rough treatment, or has suffered any other form of
damage
• if faults have arisen as a result of faults in your
electricity supply.
Due to the constant development of our products in
terms of function and design, we reserve the right to
make changes to the product without prior warning.
IMPORTER
Adexi Group
We cannot be held responsible for any printing errors.
