Fein Cargo: en For your safety.

18

en For your safety.

Read all safety warnings and all instruc-

tions. 

Failure to follow the warnings 

and instructions may result in electric 

shock, fire and/or serious injury.

Save all warnings and instructions for future reference.

Do not use this power tool before you have thor-

oughly read and completely understood this 

Instruction Manual and the enclosed “General 

Safety Instructions” (document number 

3 41 30 054 06 1). The documents mentioned should be 

kept for later use and enclosed with the power tool, 

should it be passed on or sold.

Please also observe the relevant national industrial safety 

regulations.

Intended use of the power tool:

hand-guided power tool for commercial use in weather-

protected environments using the application tools and 

accessories recommended by FEIN.

FSC1.6X/FSC1.6Q:

– for cutting polyurethane beads for glazier work in 

automobiles, lorries and busses,

– for sawing out chassis sections and removing under-

seal materials,

– for sanding of chassis parts.

FSC2.0Q:

– for sawing wood (max. 78 mm), plastic, glass-fibre 

reinforced plastics (GFRP) and for sawing sheet metal 

(max. 1 mm),

– removing tile joints and rasping or scraping off tile 

grout or carpet remainders,

– cutting elastic sealants (silicone or acrylic) on facades/

frontages and roughing groove faces,

– sanding or rasping of smaller surfaces.

Special safety instructions.

Hold the power tool by the insulated gripping surfaces when 

performing operations where the application tool could 

contact hidden wiring or its own power cord.

 Application 

tools that come into contact with a “live” wire can make 

exposed metal parts of the power tool “live” and shock 

the operator.

Use clamps or another practical way to secure and support 

the workpiece to a stable platform.

 Holding the work by 

hand or against your body leaves it unstable and may lead 

to loss of control.

Do not work materials where substances can be released 

that are harmful to one’s health, e. g., asbestos.

 Hazard-

ous/toxic dusts develop when sanding, e.g., lead-contain-

ing coatings, some wood types or metal.

Grasp the power tool in such a safe manner that your body 

never comes into contact with the application tool, espe-

cially while working with application tools such as saw 

blades or other blades pointed toward the grasping range.

Touching sharp tips or cutting edges can lead to injuries.

Wear personal protective equipment. Depending on the 

application, use a face shield or safety goggles. Wear a 

dust mask. Wear hearing protection.

 The eye protection 

must be capable of protecting against flying particles gen-

erated by the various different operations. The dust mask 

or respirator must be capable of filtering particles gener-

ated by your operation. Prolonged exposure to high 

intensity noise may cause loss of hearing.

Wear protective gloves.

 Danger of injury due to sharp-

edged accessories.

Do not rivet or screw any name-plates or signs onto the 

power tool. 

If the insulation is damaged, protection against 

an electric shock will be ineffective. Adhesive labels are 

recommended.

Clean the ventilation slots of the machine regularly. The 

motor fan draws dust into the housing.

 Excessive accumu-

lation of metal dust can cause electrical dangers.

Before putting into operation, check the mains connection 

and the mains plug for damage.

Character

Unit of measure, 

international

Unit of measure, 

national

Explanation

P

1

W

W

Power input

P

2

W

W

Output

n

S

1/min

1/min

Rated oscillation rate

°

°

Oscillation angle

L

wA

dB

dB

Sound power level

L

pA

dB

dB

Sound pressure level

L

pCpeak

dB

dB

Peak sound pressure level

K…

Uncertainty

m/s

2

m/s

2

Acceleration

m, s, kg, A, mm, V, 

W, Hz, N, °C, dB, 

/min, m/s

2

m, s, kg, A, mm, V, 

W, Hz, N, °C, dB, 

rpm, m/s

2

Basic and derived units of measure from the 

international system of units 

SI

.

WARNING

3 41 01 114 06 0.book  Seite 18  Mittwoch, 11. März 2009  10:27 10