Melissa 640-019: REPLACING THE DUSTBAG: ASSEMBLING THE VACUUM CLEANER: REPLACING THE MOTORFILTER REMOVING THE HOSE: REPLACING THE MICROFILTER FLOOR BRUSH USE EXTRA FEATURES INSTRUCTIONS FOR USE MAINTENANCE

JCV-2007 IM 26/03/04 15:09 Side 15

surfaces.

REPLACING THE DUSTBAG:

- Do not obstruct the air intake or the air

After removing the tube, open the front

outlet vents.

cover by pressing the lock lever and pulling

- Do not use the appliance to vacuum

upwards.

needles, drawing pins or string.

Remove the dustbag-holder by pulling the

handle of the holder.

ASSEMBLING THE VACUUM CLEANER:

Remove the dustbag from the holder.

Always remove the plug from the power

Replace the filter by inserting the carton of

socket before fitting or removing

the filter into the grooves of the filter-holder.

accessories.

REPLACING THE MOTORFILTER

Fitting the tube:

- Press the buttons on the end of the

- The motorfilter is the filter placed behind

tube and insert the tube into the air-

the dustbag:

intake.

- Open the front cover, and gently pull out

the filter free of the holders.

REMOVING THE HOSE:

- Insert a new motorfilter.

Remove the plug from the power socket. To

release the hose, press the buttons on the

REPLACING THE MICROFILTER

end of the hose and pull the hose firmly from

The microfilter is the filter placed on the

the air intake duct.

back of the vacuum cleaner:

Press the release-button on the grid and

FLOOR BRUSH USE

pull it out at the same time.

- Press the button on the floor brush to

Remove the microfilter and insert a new

the back position so the brush is shown

microfilter.

for cleaning hard floors

Insert the grid back in place.

-Press the button on the floor brush to

EXTRA FEATURES

the back position for cleaning carpets.

The cleaner has two wheels at the rear and

INSTRUCTIONS FOR USE

a multi-directional swivel wheel at the front

- Before using the appliance, unwind a

so that it can be moved easily. It also has a

sufficient length of cable and insert the

convenient carrying handle.

plug into the power socket. A yellow

Before storing your cleaner rewind the

mark on the power cable shows the

supply cord. The cleaner may be stored

ideal cable length. Do not extend the

standing on its end, to save space.

cable beyond the red mark.

The vacuum cleaner is fit with a carrying

strap, which makes it possible to carry the

-To rewind the power cable, press the

vacuum cleaner around while vacuum

rewind button with one hand, and guide

cleaning.

the cable with the other hand to ensure

that it does not whip causing damage.

MAINTENANCE

- Press the ON/OFF button to switch the

Pull out the plug and if necessary clean the

appliance on.

appliance on the outside with a damp cloth.

Never immerse the appliance into water and

other liquids!

15