Melissa 635-072: IMPORTANT SAFETY REGULATIONS

AB312 IM 20/05/05 15:20 Side 10

UK

- Make sure that any extension flexes used are appropriate for the aircurler with

- Warning for heat and hot surface.

respect to operating conditions, current, type of insulation, and insulation

- Make sure that defective parts are repaired, and that the aircurler’s operating

IMPORTANT SAFETY REGULATIONS

class.

reliability is maintained, before it is used.

When using electrical appliances the following basic safety instructions shall be

- Never connect the aircurler to a defective wall socket. The risk for electric

- To be used indoor only.

observed and carefully followed.

shock and short-circuiting increases.

- The rating label is fixed/imprinted on the unit.

- Carefully read through the instructions and warning texts before using the air-

- Do not make holes in the aircurler casing. The function of the aircurler will be

curler. This will ensure that you get the best possible results from your aircur-

- The appliance has a warm surface. Persons insensitive to heat must use the

impaired and the risk for electric shock and short-circuiting increases.

ler and avoid incorrect use. Save the instructions for future reference.

appliance with caution.

- Any work carried out shall only be done by a qualified technician.

- The aircurler shall only be used in accordance with the instructions enclosed.

- The aircurler is not waterproof! Do not use in wet areas.

- When unpacking check that the aircurler has not been damaged during trans-

- Always pull out the plug from the wall socket when cleaning the aircurler.

port. If so, the aircurler must be taken to a service workshop before it is con-

nected.

- The aircurler must not be used close to bathtubs, sinks or the like containing

water.

- Plastic and cellular plastics are dangerous packaging materials! They shall be

handed in to an environmental recovery station.

- The aircurler must never be submerged in water or other liquid, neither during

cleaning or operation.

- Packing materials and consumed products shall be left/discarded at a munici-

1. Styler

pal site.

- If the aircurler should be accidentally dropped in water or other liquid, the

plug must first be removed from the wall socket before lifting the aircurler out

2. Switch

- Check the label and type designation to ensure that the voltage and frequen-

of the water to avoid the risk for electric shock.

3. Curl release button

cy correspond to the mains.

- Always have the aircurler checked by an authorized technician before using

4. Dual Volt selector

- Damage to the mains flex increases the risk for electric shock and fire.

after it has been exposed to water.

5. Removable air inlet grill

Therefore, always pull the plug out from the socket by means of the actual

plug- not by the flex or the aircurler. Never lift the aircurler by the flex. The flex

- Do not touch earthed objects, such as radiators, water pipes etc. when using

6. Swirvel cord

shall never be drawn over sharp edges, or be exposed to heat or chemicals.

the aircurler. If the aircurler has an insulation fault there is considerable risk of

7. Hanging loop

Check that the flex is free from defects. If a fault is discovered, an authorized

electric shock.

8. Round brush

technician shall always replace a damaged or defective flex.

- The bread can start to burn. Never use the toaster close to or under curtains

- This product is provided with a swivel-connected main flex which if damaged

and other inflammable materials for this reason. The toaster should be under

0 = Off

shall be replaced with a flex of the same type and shall be fitted by an autho-

supervision when in use.

* = Cold air.

rized person.

- Keep the aircurler under observation when in use.

1 = Gentle warm air flow for easy styling.

- Do not allow children to use the aircurler unless under the supervision of an

adult.

2 = Stronger and warmer air flow for rapid styling and drying.