Melissa 271-002: OVERVIEW OF FUNCTIONS SETTING UP THE FAN IMPORTANT SAFETY MEASURES USE
OVERVIEW OF FUNCTIONS SETTING UP THE FAN IMPORTANT SAFETY MEASURES USE: Melissa 271-002
Table of contents
- OVERVIEW OF FUNCTIONS SETTING UP THE FAN IMPORTANT SAFETY MEASURES USE
- CLEANING THE GUARANTEE DOES NOT APPLY IMPORTER

271002_IM 25/02/04 12:56 Side 10
UK
To get the best out of your fan, please read these
- Ensure that the cable does not get caught
instructions carefully before using it for the first
beneath the device, in drawers, behind
time.
shelves etc.
We also recommend that you keep the
- Do not run the cable under carpets, rugs,
instructions for future reference, so that you can
etc.
remind yourself of the functions of the fan.
- Ensure the cable is kept away from busy
areas to avoid anyone tripping over it.
OVERVIEW OF FUNCTIONS
- Do not use if the device or cable becomes
1.
1. Rear cage
2.
damaged. Take it to a specialist for repair.
2. Oscillation button
3.
- For indoor use only.
3. Front cage
4. Stand
SETTING UP THE FAN
5. Height adjustment screw
- Remove the wing screw from the motor pin.
6. Base
5.
- Fit the rear cage onto the motor pin. Make
4.
sure that the 2 holes on the motor match the
2 holes on the rear cage. Fit the wing screw
6.
and screw it on firmly.
- Put the blade on the motor pin and carefully
tighten the screw.
IMPORTANT SAFETY MEASURES
- Fit the front cage onto the rear cage and fix
Please ensure that the voltage of the fan
them together using the metal clips. Tighten
corresponds to the mains voltage.
the small screw.
- Use the fan only for the purpose(s) defined in
the user guide.
USE
- Never insert your fingers, pencils or other
The fan has 3 speed settings:
objects through the fan cage during
0 – Fan is off
operation.
1 – Lowest speed
- Switch the fan off before moving or cleaning.
2 – Medium speed
- The fan should be set up on a stable and
3 – Top speed
level surface to avoid it being knocked over.
The fan can operate in oscillating or stationary
- Do not expose the fan to excessive heat or
mode. Press the oscillation button to activate the
humidity, as this can cause damage to the
oscillating mode.
electrical components.
- Do not immerse in any form of liquid.
The height of the floor fan can be adjusted.
- It is not advisable to expose people, in
Loosen the screw to move the stand up or down
particular babies and the elderly, to a
as required. Tighten the screw at the desired
continuous stream of cold air.
position.
- The fan should be kept out of the reach of
children.
10

