Melissa 245-066: INTRODUCTION SAFETY MEASURES Normal use of the kettle KEY PRIOR TO FIRST USE Positioning the kettle USING THE KETTLE Cord, plug and mains socket

INTRODUCTION SAFETY MEASURES Normal use of the kettle KEY PRIOR TO FIRST USE Positioning the kettle USING THE KETTLE Cord, plug and mains socket: Melissa 245-066

Table of contents

UK

INTRODUCTION

be inspected and, if necessary, repaired by

an authorised repair engineer, otherwise

To get the best out of your new kettle, please read

there is a risk of electric shock. Never try to

through these instructions carefully before using

repair the appliance yourself.

it for the first time. Pay particular attention to the

safety measures. We also recommend that you

Remove the plug from the socket for

keep the instructions for future reference, so that

cleaning.

you can remind yourself of the functions of the

Avoid pulling the cord when removing the

kettle.

plug from the socket. Instead, hold the plug.

Check that it is not possible to pull or trip

SAFETY MEASURES

over the kettle or any extension cord.

Normal use of the kettle

8.

4.

5.

2.

The kettle may only be used with the base

KEY

1.

3.

station supplied.

1. Pouring spout

Incorrect use of the kettle may cause

2. Lid

personal injury and damage to the kettle.

3. Water level gauge

Use the kettle for its intended purpose only.

4. Indicator light

The manufacturer is not responsible for

6.

5. On/off button

any damage resulting from incorrect use or

6. Switch

handling (see also Guarantee Terms).

7. Base

The kettle may only be connected to 230 V,

8. Lock for opening of lid

50 Hz.

7.

The kettle should not be switched on unless

PRIOR TO FIRST USE

there is water in it.

Before using the kettle for the first time (or

The kettle or cord must not be placed in

following a long period without use), the kettle

water or any other liquid.

should be boiled 3 times.

Never leave the kettle unattended when in

1. Read the safety instructions through

use and keep an eye on children.

carefully.

The water level in the kettle must not exceed

2. Ensure that the cord is fully extended.

the maximum filling level (MAX 1.7L) marked

3. Fill the kettle with water until the water level

on the water level gauges.

reaches the maximum filling level of 1.5 litres.

This kettle is not suitable for commercial or

4. Switch on the kettle by 5 the on/off button (5)

outdoor use.

“I”.

5. Pour out the water once it has boiled.

Positioning the kettle

6. Repeat the process described under points

Always place the kettle at the back of a

3-5 three times.

kitchen counter and at a safe distance

USING THE KETTLE

from flammable objects such as curtains,

tablecloths or similar.

1. Pour fresh water into the kettle. The kettle

must contain at least 0.5 l and no more than

Always place the kettle so that the spout is

1.5 l.

turned away from any other surfaces as the

steam from boiling water may damage them.

2. Place the kettle on its base (7), which should

be placed on a fixed, flat surface.

Do not cover the kettle.

3. Switch the kettle on with the on/off button

Do not allow the cord to hang over the edge

(5) so that the button is pointing upwards

of the counter, and keep it away from hot

towards the letter "I".

objects and naked flames.

Return the kettle to its base after use.

The indicator light (4) will now light up and the

water will boil within a few minutes, depending on

Cord, plug and mains socket

the amount of water in the kettle. If you want to

Check regularly that the cord is not damaged

interrupt the boiling, you can do this at any time

and do not use the kettle if it is, or if it has

by pressing the on/off button (5) "0".

been dropped or damaged in any other way.

If the kettle, cord or plug is damaged, it must

10