Melissa 235-002: UK INTRODUCTION KEY SAFETY MEASURES PRIOR TO FIRST USE USE
UK INTRODUCTION KEY SAFETY MEASURES PRIOR TO FIRST USE USE: Melissa 235-002
Table of contents
- UK INTRODUCTION KEY SAFETY MEASURES PRIOR TO FIRST USE USE
- CLEANING INFORMATION ON DISPOSAL AND RECYCLING OF THIS PRODUCT GUARANTEE TERMS IMPORTER

10
11
UK
INTRODUCTION
KEY
To get the most out of your new hairdryer, please read
1. Ionisation button
through these instructions carefully before using it for
2. Detachable rear fi lter
the fi rst time. We also recommend that you keep the
3. Cool shot button
instructions for future reference, so that you can remind
4. Temperature control
yourself of the functions of your hairdryer.
5. Speed selector
6. Hanging loop
SAFETY MEASURES
7. Styling comb
8. Air concentrator
Normal use of the hairdryer
9. Finger diffuser
• Incorrect use of the hairdryer may cause personal
injury and damage to the appliance.
• Use the hairdryer for its intended purpose only.
The manufacturer is not responsible for any injury
or damage resulting from incorrect use or handling
(see also Guarantee Terms).
• The hairdryer may only be connected to 230 V, 50
Hz.
• The hairdryer or cord must not be placed in water or
any other liquid.
• Never leave the hairdryer unattended when in use.
Children may only use the hairdryer under the
supervision of an adult.
• This hairdryer is not suitable for commercial or
outdoor use.
• When in use, the air intake on the back of the
hairdryer must not be blocked. If the air intake is
blocked, the hairdryer will overheat. If this happens,
the overheat protection will automatically shut off
PRIOR TO FIRST USE
power to the hairdryer. Turn off the hairdryer, and
remove the plug from the mains socket.
Check that you have removed all packaging from your
• The hairdryer must not be used without the rear fi lter
hairdryer.
fi tted.
• Do not leave the hairdryer on clothes, bedding, etc.
USE
made from synthetic materials, which are heat-
• To switch on the hairdryer, set the speed selector (5)
sensitive and easily combustible, while it is switched
to one of the two positions above “0” and select a
on or still warm.
temperature setting using the temperature control
• Do not use the hairdryer in the vicinity of
(4).
combustible or explosive liquids or gases, for
• The detachable air concentrator (8) and styling
example, in the vicinity of oxygen cylinders.
comb (7) provide a concentrated air supply. Use the
• In order to avoid burns, you should avoid blowing
fi nger diffuser (9) to concentrate the air in numerous
hot air directly into the eyes or on very sensitive
points over a wider area.
skin.
• If you press and hold the cool shot button (3), the
hairdryer blows out cool air. This is useful when your
Cord, plug and mains socket
hair is dry and needs to be set.
• Check regularly that the cord and plug are not
• To switch off the hairdryer, set the speed selector to
damaged and do not use the hairdryer if they are, or
position “0”. The hairdryer can be hung up using the
if it has been dropped or damaged in any other way.
loop (6) at the bottom of the handle.
• If the hairdryer, cord or plug is damaged, the
• Set the ionisation button (1) to the “ON” position
appliance must be inspected and, if necessary,
to activate the ionic function. This prevents static
repaired by an authorised repair engineer, otherwise
electricity in the hair and makes it soft and shiny.
there is a risk of electric shock. Never try to repair
Set the ionisation button to the “OFF” position to
the appliance yourself.
deactivate the ionic function.
• Remove the plug from the socket before cleaning.
• Avoid pulling the cord when removing the plug from
the socket. Instead, hold the plug.
• The cord must not be wound around the appliance.

