Epson L555: E Transporting the

E Transporting the: Epson L555

Basic Guide

Transporting the Product

Secure the print head to the case with tape as

E

Transporting the

shown, then close the scanner unit.

Product

English

If you move the product some distance, you need to

prepare it for transportation in its original box or one of

a similar size.

Important:

c

When storing or transporting the product,

avoid tilting it, placing it vertically, or turning

it upside down; otherwise ink may leak.

Note:

When storing or transporting an ink bottle

Do not place tape on the white flat cable inside the

after removing its seal, do not tilt the bottle and

product.

do not subject it to impacts or temperature

changes. Otherwise, ink may leak even if the

cap on the ink bottle is tightened securely. Be

Set the transportation lock to the locked

sure to keep the ink bottle upright when

F

(Transporting) position.

tightening the cap, and take measures to

prevent ink from leaking when you transport

the bottle.

Remove all paper from the rear paper feed and

A

make sure the product is off.

Close the paper support and the output tray.

B

Open the scanner unit and make sure the print

C

head is in the home position on the right.

Unhook the ink tank unit from the product and

G

lay it down, and then make sure to install the cap

onto the ink tank securely.

Note:

If the print head is not in the home position on the right,

turn on the product and wait until the print head locks in

the far right position. Then turn off the product.

Unplug the power cord from the outlet, then

D

disconnect all cables from the product.

15